Bedienungsanleitung Sharp SDHX500 (Seite 52 von 72) (Englisch, Französisch)

19055

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

E-47

SD_HX500_SEC_SECL_E5.fm04/2/4

ENGLISH

TINSKA015AWZZ

SD-HX500

Advanced Features

- Changing the default settings of the amplifier -

Changing the default settings of the amplifier (continued)

When you select "LARGE", all channel signals are sent to the speaker.

When you select "SMALL", frequencies below the value you set for crossover fre-

quency (see page 49) are sent to the subwoofer.

(*) indicates the default setting.

Notes:

" The speaker size setting is only available for the subwoofer if the input is set to

tuner, or the surround is "STEREO" or "VIRTUAL".

" On some DVD-Audio or SACD discs, the subwoofer may not produce sound even

if the speaker size is set to "SMALL".

" "F-SMALL" and "SW-NO" cannot be combined. If the subwoofer is changed to

"SW-NO" while the front speakers are set to "F-SMALL", they are changed to "F-

LARGE". When the front speakers are changed to "F-SMALL" while the subwoofer

is set to "SW-NO", it is changed to "SW-YES".

" If "LARGE" is set for a small speaker, malfunction may result. Be sure to set the

speaker size to "SMALL".

" When the center and surround speakers and subwoofer are not connected, set the

speaker size to "C-NO", "S-NO" and "SW-NO". Otherwise, the protection circuit

may be activated and the power is turned off.

! Speaker delay setting

When some of the speakers are at a different distance from the listening point, you

can select the speaker delay to make it seem as though the speaker distances are

the same.

Notes:

" The speaker delay setting is only available for the front speakers and subwoofer if

the input is set to tuner, or the surround is "STEREO" or "VIRTUAL".

" The speaker delay setting is invalid while playing DVD-Audio or SACD discs (valid

for the CD layer of SACD discs).

Within 10 seconds, press the or button to

select their sizes.

To set sizes of other speakers, repeat the operation

from step 3.

Press the RETURN button twice.

The setting is complete.

Speaker type Speaker size

Front speaker (Left, Right) F-LARGE * Large diameter

F-SMALL Small diameter

Center speaker C-LARGE * Large diameter

C-SMALL Small diameter

C-NO OFF

Surround speaker (Left, Right) S-LARGE * Large diameter

S-SMALL Small diameter

S-NO OFF

Subwoofer SW-YES * ON

SW-NO OFF

Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET

UP button.

Within 10 seconds, press the or button to

select "SP DELAY", and press the ENTER

button.

Within 30 seconds, press the or button to

select the desired speaker.

The indicator of the selected speaker flashes.

Within 30 seconds, press the or button to

select the distance.

" You can change the distance in 1 foot (0.3 m) steps.

" To set the distance of other speakers, repeat the op-

eration from step 3.

Press the RETURN button twice.

The setting is complete.

Speaker type Delay range Default setting

FL Front speaker (Left) 1 to 29 ft 6 ft (2 m)

CT Center speaker 1 to 29 ft 6 ft (2 m)

FR Front speaker (Right) 1 to 29 ft 6 ft (2 m)

SR Surround speaker (Right) 1 to 29 ft 6 ft (2 m)

SL Surround speaker (Left) 1 to 29 ft 6 ft (2 m)

SW Subwoofer 1 to 29 ft 6 ft (2 m)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp SDHX500 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info