Bedienungsanleitung Sharp SJ-BA34IHXIE (Seite 7 von 110) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

787050

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

EN -7-

CHAPTER -1: GENERAL WARNINGS

If your refrigerator has a fan condenser:

The condenser of your fridge is placed at the bottom of

cabinet. As a result of that, assemble the spacer by xing

it to holes on the cover bottom panel and turn 90° that’s

shown below gure for arranging the distance between

the refrigera¬tor and the back wall at where you place the

fridge. You can move the fridge towards the back wall until

that point.

Fridge freezer should be placed against a wall with a free

distance not exceeding 75 mm.

Plastic for distance setting

Before using your fridge freezer

• Before setting up your fridge freezer, check for any visible damage. Do not install or use your fridge freezer

if it is damaged

• When using your fridge freezer for the rst time, keep it in an upright position for at least 3 hours before

plugging into the mains. This will allow efcient operation and prevent damage to the compressor.

• You may notice a light odour when using your fridge freezer for the rst time. This is perfectly normal and

will fade away as the fridge starts to cool.

Information about new-generation cooling technology

Fridge freezers with new-generation cooling technology have a different working system than

static fridge freezers. In normal fridge freezers, humid air entering the freezer and the water

vapour emanating from the foods, turns into frost in the freezer compartment. In order to melt

this frost, in other words defrost, the fridge has to be unplugged. In order to keep foods cold

during the defrosting period, the user must store the food elsewhere and the user must clear the

remaining ice and accumulated frost.

The situation is completely different in freezer compartments equipped with new-generation

cooling technology. With the aid of fan, cold and dry air is blown throughout the freezer

compartment. As a result of the cold air that is blown easily throughout the compartment – even

in the spaces between shelves – foods are frozen equally and properly. And there will be no frost.

The conguration in the refrigerator compartment will be nearly same as the freezer compartment.

Air emitted by the fan located at the top of refrigerator compartment is cooled while passing

through the gap behind the air duct. At the same time, air is blown out through the holes on the

air duct so that cooling process is successfully completed in the refrigerator compartment. Holes

on the air duct are designed for even air distribution throughout the compartment.

Since no air passes between the freezer and refrigerator compartment, odours will not mix.

As a result, your fridge with new-generation cooling technology is easy to use and it offers you

an access to a huge volume and aesthetic appearance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp SJ-BA34IHXIE Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp SJ-BA34IHXIE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info