Bedienungsanleitung Sharp SJ-BA34IHXIE (Seite 13 von 110) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

787050

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

EN -13-

CHAPTER -3: USING YOUR FRIDGE FREEZER

=HUR'HJUHH=RQH (In some models)

Keeping food in the FKLOOGUDZHU instead of the freezer or

refrigerator compartment allows food retain freshness and avour

longer while preserving its fresh appearance. If the chiller tray becomes

dirty, remove it and wash with water.

(Water freezes at 0 °C, but foods containing salt or sugar require

lowered temperatures to freeze)

Normally people use the chiller compartment for raw sh, rice, etc...

Do not put foods you want to freeze or ice trays in order to make

ice.

Removing the chiller shelf

• Pull the chiller shelf out toward you by sliding it on rails.

• Pull the chiller shelf up from the rail to remove.

Freezer box

• The freezer box is for foods that need to be accessed more easily.

• Removing The freezer box;

• Pull the box out as far as possible

• Pull the front of box up and out.

!Make the inverse of the same operation for the resetting the

sliding compartment.

Note: Always hold the handle of box while moving in or out.

Fresh dial

If you want to keep your vegetables longer in that

compartment, you have to change the humidty controller that

is located at the front of the crisper, to closed position. With the

aid of this function, humidty level in the crisper compartment,

will stay constant and vegetables will last longer.

If you want to keep your vegetables colder in that

compartment, you have to change the humidity controller to

open position. By doing this change, you will allow the cold

air to enter the crisper compartment. As a result of this, your

vegetables will be colder.

If you see any condensation on the glass shelf that is located at the top of crisper, you can change the humidity

controller to open position.

Visual and text descriptions on the accessories section may vary according to the model.

Adapti-Lift Door Shelf (In some models)

Six different height adjustments can be made to provide storage

areas that you need by Adapti-Lift.

To change the position of Adapti-Lift ;

Hold the bottom of the shelf and pull the buttons on the side of

the door shelf direction of arrow (Fig.1)

Position door shelf the height you need by moving up and down.

After you get the position that you want the door shelf, release

the buttons on the side of the door shelf (Fig.2) Before releasing

the door shelf, move up down and make sure the door shelf is

xed

Note: Before moving door shelf is loaded, you must hold the shelf by supporting the bottom. Otherwise, door shelf

could fall off the rails due to the weight. So damage may occur on the door shelf or rails.

Fig.1

Fig.2

• Make sure to unplug the fridge before starting to clean it.

• Do not wash your fridge by pouring water.

• You can wipe the inner and outer sides with a soft cloth or a sponge using warm and soapy water.

• Remove the parts individually and clean with soapy water. Do not wash in dishwasher.

• Never use ammable, explosive or corrosive material like thinner, gas, acid for cleaning.

• You should clean the condenser with broom at least once a year in order to provide energy saving and increase

the productivity.

Make sure that your fridge is unplugged while cleaning.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp SJ-BA34IHXIE Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp SJ-BA34IHXIE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info