Bedienungsanleitung Sharp SJ-LC31CHXAF (Seite 14 von 146) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

787222

Zoom out

Zoom in

Vorherige Seite

1/146

Nächste Seite

EN -13-

CHAPTER -6: TROUBLESHOOTING

Your fridge is not operating

Check if:

• There is power

• The plug is correctly connected to the socket

• The plug or mains fuse has blown

• The socket is faulty. Examine this by plugging your fridge into a working socket.

The appliance performs poorly

Check if:

• The appliance is overloaded

• The doors are closed properly

• There is any dust on the condenser

• There is enough space near the rear and side walls.

Your fridge is operating noisily

Motor noise: Indicates the compressor is operating normally. The compressor may cause more noise for a short

time when it is rst activated.

Bubbling noise and splash: Due to the ow of the refrigerant in the tubes of the system.

Air blowing noise: Indicates normal operation of the system due to the circulation of air.

There is a build-up of humidity inside the cooler

Check if:

• All food is packed properly. Containers must be dry before being placed in the fridge.

• The fridge door is opened frequently. Humidity of the room enters the fridge when the doors are opened.

Humidity increases faster when the doors are opened more frequently, especially if the humidity of the room

is high.

The door is not opening and closing properly

Check if:

• There is food or packaging preventing the door from closing

• The door compartments, shelves and drawers are placed properly

• The door joints are broken or torn

• Your fridge is level.

Recommendations

• In instances of a power cut unplug the appliance. This prevents damage to the compressor. You should delay

plugging in 5 – 10 minutes after you regain power supply. This will avoid damage to components.

• The cooling unit of your refrigerator is hidden in the rear wall. Therefore, water droplets or ice may occur on the

rear surface of your fridge due to the operation of the compressor in specied intervals. This is normal. There

is no need to perform a defrosting operation unless the ice is excessive.

ERROR TYPE MEANING WHY WHAT TO DO

E10 Fridge compartment

is not cold enough

Likely to occur after:

- Long term power failure.

- Hot food has been left in

the fridge.

1. Set the fridge temperature to

a colder value or set Super

Cool. This should remove the

error code once the required

temperature has been reached.

Keep doors closed to improve

time taken to reach the correct

temperature.

2. Please empty the location

at the front area of air duct

channel holes and avoid

putting food close to the

sensor.

If this warning continues, contact

the Sharp help desk as soon as

possible.

E11 Fridge compartment

is too cold Various

1. Check is Super Cool mode is

activated

2. Reduce the fridge

compartment temperature

3. Check to see if vents are clear

and not clogged

If this warning continues, contact

the Sharp help desk as soon as

possible.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp SJ-LC31CHXAF Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info