Bedienungsanleitung Sharp sj pd591rs (Seite 3 von 116) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

361081

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

EST

SLO

WARNING

■ Do not install the refrigerator in a damp or wet

location as this may cause damage to the

insulation and a leak. Condensation may also

build on the outer cabinet and cause rust.

Keep adequa

e ventilation space around the

refrigerator.

•

The figure shows the minimum required space for

installing the refrigerator. It differs from the space in

the measurement condition of the amount of power

consumption.

•

It is possible to use the refrigerator with a less amount

of power consumption by keeping greater space.

•

If using the refrigerator in the space below dimension

of the figure, it may cause the temperatures in the unit

to rise, loud noise, and failure.

Using the two front adjustable feet, ensure that the

refrigerator is positioned firmly and level on the floor.

Remove the 2 screws of the cabinet lower part, and

use these to fit the foot covers. (supplied inside the

refrigerator compartment)

NOTE

• Position your refrigerator so that the plug is accessible.

• Keep your refrigerator out of direct sunlight.

• Do not place next to heat generating appliance.

• Do not place directly on the ground.

Provide suitable stand.

When transporting

• Using the casters, it is possible to move back and forth.

• Carry the refrigerator by holding the handles located on

the rear and bottom.

Before using your refrigerator

Clean the inside parts with a cloth soaked in warm water.

If soapy water is used, wipe it off thoroughly with water.

This refrigerator is provided with a indicator of temperature

in the refrigerator compartment to allow you to control the

average temperature in the coldest zone.

Coldest zone

The symbol indicates the coldest zone in the

refrigerator compartment. (The door pocket

positioned at the same height as the symbol

isn’t the coldest zone.)

Checking the temperature in the

coldest zone

You can carry out regular checks to ensure the

temperature in the coldest zone is correct and, if

necessary, adjust the refrigerator temp. control.

To maintain a correct temperature inside the appliance,

check that the indicator of temperature is always BLUE.

If the indicator of temperature turns WHITE, the

temperature is too high; in this case, increase the

refrigerator temp. control setting and wait for 6 hours

before checking the indicator of temperature again.

NOTE

• The internal temperature of the refrigerator depends on

various factors such as the ambient temperature of the

room, the amount of food stored and the frequency of door

opening.

• When fresh food has been introduced or the door has been

left open for some time, it is normal for the indicator of

temperature to turn WHITE.

INSTALLATION

60 mm

or more

60 mm

or more

90 mm

or more

SJ-PD591S

SJ-PD641S

SJ-PD691S

1400mm

1500mm

1230mm

1400mm

Foot cover

Adjustable foot

2 pcs.

4 pcs.

SJ-PD591S :

SJ-PD641S , SJ-PD691S :

INDICATOR OF

TEMPERATURE

Symbol

BLUE

WHITE

Correct setting

Temperature too high,

adjust the refrigerator temp.

control.

(B013)02-07_Eng.fm Page 3 Monday, June 29, 2009 10:07 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp sj pd591rs Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info