Bedienungsanleitung Sharp sjp 43n sl4 (Seite 6 von 36) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

357199

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

OUT

STORING FOOD

Refrigeration reduces the rate of food spoilage.

To maximize the shelf life of perishable food products,

ensure that the food is of the freshest possible quality. The

following is a general guide to help promote longer food

storage.

Fruit / Vegetables

To minimize moisture loss, fruit and vegetables should be

loosely enclosed in a plastic material e.g. wrap, bags (do

not seal) and place in the Vegetable crisper. Those fruits

and vegetables with thick skins e.g. oranges do not require

wrapping.

Dairy Products & Eggs

• Most dairy products have a use by date on the outer

packaging which informs the recommended

temperature and shelf life of the product.

• Eggs should be stored in the Egg holder.

Meats / Fish / Poultry

• Place on a plate or dish and cover with paper or plastic

wrap.

• For larger cuts of meat, fish, or poultry, place to the rear

of the shelves.

• Ensure all cooked food is wrapped securely or placed in

an airtight container.

NOTE:

• Evenly place the food on the shelves to allow the

cooling air to circulate efficiently.

• Hot foods should be cooled before storing. Storing hot

foods increases the temperature in the unit and

increases the risk of food spoilage.

• Do not block the outlet and inlet of the cool

air circulating circuit with foods or

containers; otherwise the foods will not be

evenly cooled throughout the fridge

freezer.

FOR BEST FREEZING

• Quality of foods should be fresh.

• Freeze small quantities of food at a time to freeze them

quickly.

• Food should be properly stored or covered and the air

should be removed to seal tightly.

• Evenly place the food in the freezer.

• Label bags or containers to keep an inventory of

freezing food.

CARE AND CLEANING

Some household cleaning chemicals

may affect the inside surfaces and plastic

shelves resulting in splitting or cracks

occurring.

When cleaning all plastic parts inside this

fridge freezer, only use diluted

dishwashing liquid (soapy water). Make

sure that all plastic parts are thoroughly

rinsed with water after cleaning.

1.Remove the shelves and pockets from the cabinet and

door. Wash them in warm soapy dishwashing water;

rinse in clean water and dry.

2.Clean the inside with a cloth soaked in warm soapy

dishwashing water. Then, use cold water to wipe off

soapy water.

3.Wipe the exterior with a soft cloth each time it is soiled.

4.Clean the Magnetic door seal with a toothbrush and

warm soapy dishwashing water.

5.Whenever the fridge freezer is moved to clean or

repositioned, the Evaporating pan should be removed

and cleaned.

NOTE:

• Do not use polishing powder, benzine, hot water etc.

• If undiluted detergent is used or soapy water is not

wiped off thoroughly, cracking of plastic parts can result.

• Wipe any food oils adhered to plastic components as

they can cause cracking of the plastic surface.

• The glass shelves weigh approximately 2kg each. Hold

firmly when removing from the cabinet or carrying.

Evaporating pan;

How to remove/set

Remove the two screws

to take the Evaporating

pan off. Please pay

attention to the safety

since the compressor is

very hot.

Replacing method of the

lamp bulb

1.Unplug the fridge freezer first

to prevent electric shock.

2.Remove the Light cover.

3.Replace the lamp bulb with the

same type.

Base E12, MAX 15W, T-20

Switching off your fridge freezer

If you switch your fridge freezer off when you are going

away for an extended period, remove all food, clean the

interior thoroughly. Remove the power cord plug from the

power socket and leave all doors open.

WHAT TO DO BEFORE YOU CALL FOR SERVICE

Before you call for service, check the following points.

IT IS NORMAL for the refrigerator to produce the following

sounds.

• Loud noise produced by the compressor when

operation starts --- Sound becomes quieter after a

while.

• Loud noise produced once a day by the compressor

--- Operating sound produced immediately after

automatic defrost operation.

• Sound of flowing fluid (gurgling sound, fizzing sound)

--- Sound of refrigerant flowing in pipes (sound may

become louder from time to time).

• Cracking or crunching sound --- Sound produced by

expansion and contraction of inner walls and internal

parts during cooling.

• Squeaking sound --- Sound produced by expansion and

contraction of internal parts.

IT IS NORMAL that the outside of a cabinet may be hot

when touched. The hot pipe is in the cabinet in order to

prevent dew generation.

IF YOU STILL REQUIRE SERVICE

Refer to your nearest service agent approved by SHARP.

Compressor

Evaporating pan

Light

cover

Do not place food directly

in front of cold air outlet.

This may lead to the food

freezing.

A684_ 修正 _1.bookPage6Monday,April25,20055:08PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp sjp 43n sl4 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info