Bedienungsanleitung Sharp UA-KIN40E (Seite 22 von 156) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

787867

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

EN-20

ERROR DISPLAY

• The concentration of

Plasmacluster ion is descending.

Maintain the Plasmacluster

Ion Generating Unit (Electrode

Section).

• Make sure that the Humidifying

Filter, Humidifying Tray and

Roller are properly installed, and

then turn the power to ON again.

• Make sure the Plasmacluster

Ion Generating Unit inserted

properly.

Pull out the Plasmacluster Ion

Generating Unit and insert it to

the end again, and then carry out

the operation again.

• Unplug the product, wait one

minute, and then plug the product

in again.

The product makes a clicking or ticking

sound.

• The product may make clicking or ticking sounds

when it is generating ions.

The Cleanliness Indicator is blue even

when the air is not clean.

• The air may have been dirty when the product

was plugged in. Unplug the product, wait one

minute, and then plug the product in again.

The Cleanliness Indicator is red even

when the air is clean.

• Dirty or clogged Sensitive Dust Sensor openings

interfere with sensor operation. Gently clean the

Sensor Filter or the Back Panel.

The Cleanliness Indicator changes

colour frequently.

• The Cleanliness Indicator automatically changes

colour when the Sensitive Dust Sensor and Odour

Sensor detect impurities. If you are concerned

about the change, you can change sensor

sensitivity. (Page 12, 13)

Filter Maintenance Lamp is on.

• Whenever after performing maintenance or

replacing the Humidifying Filter, connect the

power cord to an outlet and then press the Filter

Reset Button for more than 3 seconds.

(Page 14)

The Display is turned off.

• When the Light Control is set to “Auto”, the light

automatically turns off when the room is dark or

operating in sleep mode. Moreover, when the

Light Control is set to “Turn off”, the light is always

off.

If you do not want the light to be off, set the Light

Control to the “Dim” setting. (Page 12)

The Display does not match weather

report or another hygrometer or

thermometer in the room.

• Outdoor and indoor as well as the home

environment (the volume of traffic nearby, number

of stories in home, etc.) may cause a reading

different than those data.

• There is a difference in the level within the same

room.

The Humidify Indicator on the Display

does not light up when the tank is

empty.

• The room has reached the appropriate level of

humidity and has stopped humidifying.

• Check the styrofoam float for impurities. Clean

the Humidifying Tray. Make sure that the product

is on a level surface.

The water level in the tank does not

decrease or decreases slowly.

• Check to see if the Humidifying Tray and

Water Tank are correctly installed. Check the

Humidifying Filter.

• If the filter is extremely dirty, clean or replace it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp UA-KIN40E Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info