Bedienungsanleitung Sharp UD-P20E-W (Seite 6 von 46) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

787900

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Operating environment

• Working temperature: 5°C to 35°C.

• This machine is suitable for indoors, e.g. Living room, study, oce room,

warehouse, basement, underground garage.

• Make sure the door and window are closed before turning on the unit to

get the best result.

• Ensure that the unit is placed on a stable and at oor surface. If the

oor’s surface is not even, there is a risk that the unit may be unstable

and topple over. Also excessive vibration and noise may be result.

Components diagrams – parts names

Refer to the 2 and 3 on page 1 for the location of the following parts:

1. Top casing

2. Handle

3. Control panel

4. Front cover

5. Louver (air outlet)

6. Mains lead and plug

7. Castor

8. Water tank

9. Drain pipe (not supplied)

10. Air intake and dust lter

Operating Introduction – How to operate

Control panel

Refer to the 4 of the control panel on page 1.

The name and function of control panel

1. POWER – Press this button to switch the power on and o.

2. MODE – Press this button to set the dry clothes mode or dehumidify

mode

3. HUMIDITY – Press this button to set the desired humidity.

4. TIMER/LOCK – Press this button to set the machine shutdown time.

The display will show the shutdown time accordingly. Press this button

for 3 seconds, could turn on or o the child lock function, the lock icon

will show or o on the display.

5. SPEED – Press this button to adjust the fan speed (there are 2 fan

speeds).

6. SWING – Press this button to turn on or o the swing function.

7. ON/OFF INDICATOR – Lights up when the unit is on, turns o when

unit is o.

8. DRY INDICATOR – Turns on during the drying function.

9. DEHYMIDIIFNG INDICATOR – Turns on when the unit is dehumidifying.

10. DEFROST INDICATOR – Lights up when the unit is in the defrost

mode.

11. DISPLAY – Shows the current status of the dehumidifying function

(humidity in the air) and other functions.

12. TANK FULL – Lights up when the water tank is full.

13. KEY LOCK INDICATOR – When the key lock is active, this indicator

lights up.

14. TIMER ON INDICATOR – When the timer is active, this indicator lights

up.

15. FAN SPEED INDICATOR – When the speed of the fan is high or low the

respective light illuminates.

16. LOUVER ON INDICATOR – When the louver is in operation, this indica-

tor turns on.

Operating introduction

Power on

Plug in the appliance to the mains supply and press the POWER button, it

will start and the air outlet louver will open.

When powered on, the unit will start to dehumidify with the fan set to

high. The compressor will activate after three minutes.

If the appliance is turned o via the POWER switch and not unplugged

from the mains supply, it will start up again in the same mode.

Power o

While the appliance is operating, press the POWER button to turn it o.

Mode setting button

You can change the mode of the dehumidier to dry clothes or

dehumidify. To do this press the MODE button.

1. Dry Clothes Function: When the DRY indicator is illuminated the unit

will continually dehumidify whatever the ambient humidity is. The fan

speed will be locked in the DRY function and can not be changed.

2. Dehumidify Function: When the DEHUMIDIFY indicator is illuminated

the unit will dehumidify the air. While in this mode, the fan speed can

be set and the humidity setting can be controlled.

Humidity setting

To change the humidity level, press the humidity setting button, each time

the button is pressed, the display will change as follows CO~40%~45%~50

%~55%~60%~65%~70%~CO. After setting the humidity level, the display

will revert to the current moisture level detected by the internal sensor.

When the machine detects that the ambient humidity is 2% lower

than the set humidity, the machine will stop dehumidifying, the fan

will keep working in low speed. When the machine detects that the

ambient humidity is 2% higher than the set humidity, the machine will

start dehumidifying and the fan come back to work at set speed. When

the ambient humidity is ≤30%, the LO icon will be displayed; When the

ambient humidity is ≥80%, the HI icon will be displayed.

When the unit is in the CO mode it will dehumidify until the humidity is

30%, at which point it will stop. Should the humidity level rise above 30%,

then the dehumidier will turn back on. The machine default setting is CO

when switch on the machine in the beginning.

When operating in the dry clothes function, the machine is running

in CO status.

Timer

To start the timer function, press the TIMER button; the timer indicator will

illuminate. On each press of the TIMER button, the display will change from

1 to 8 hours in 1 hour steps. 0H means that the timer mode is canceled.

While in the timer mode, if the water tank is full or if it enters the auto

defrost mode, the unit will stop.

Fan Speed setting

To control the speed of the fan, press the FAN button. There are two fan

speeds which are low or high; each time the FAN button is pressed, the

speed of the fan toggles between these two speeds. Note that the fan

speed can not be set while in the DRY function.

Swing

To make the air outlet louver open and close continually, press the SWING

button. Pressing the SWING button again disables this function.

Lock function

To prevent accidental operaiton of the unit, the keypad can be locked.

Sharp UD-P20E-W Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info