288306
68
Zoom out
Zoom in
Vorherige Seite
1/83
Nächste Seite
Advanced Features
58
Advanced Features
Installing the USB driver
In the examples below the CD-ROM drive
letter is taken as “R:”. Select the correct drive
letter according to your operating environ-
ment.
Windows 98 SP1/98 SE
1 “Add New Hardware Wizard” appears
after performing “Preparation”.
2 Insert the CD-ROM containing the
USB driver into the CD-ROM drive,
then click “Next”.
3 Select “Search for the best driver for
your device.”, then click “Next”.
4 Select “Specify a location:”, and
specify “R:\USBDRV\WIN98”, then
click “Next”.
5 Check the message, then click “Next”
to begin installation.
6 Click “Finish” to complete the
installation.
Windows 2000 SP2
For installing the USB driver, you need to
log in as the system administrator.
1 “Found New Hardware Wizard”
appears after performing “Prepara-
tion”, then click “Next”.
2 Select “Search for a suitable driver for
my device”, then click “Next”.
3 Select “Specify a location”, insert the
CD-ROM containing the USB driver
into the CD-ROM drive, then click
“Next”.
4 Specify “R:\USBDRV\WIN2KXP”,
then click “OK”.
5 Check the message, then click “Next”
to begin installation.
6 Click “Finish” to complete the
installation.
Windows Me
1 “Add New Hardware Wizard” appears
after performing “Preparation”.
2 Select “Specify the location of the
driver”.
3 Insert the CD-ROM containing the
USB driver into the CD-ROM drive,
then click “Next”.
4 Select “Search for the best driver for
your device.” and “Specify a location.
5 Specify “R:\USBDRV\WINME” and
click “Next”.
6 Click “Finish” to complete the
installation.
Windows XP HE/PE
For installing the USB driver, you need to
log in as the system administrator.
1 “Found New Hardware Wizard”
appears after performing
“Preparation”.
2 Select “Install from a list or specific
location”.
3 Insert the CD-ROM containing the
USB driver into the CD-ROM drive,
then click “Next”.
4 Select “Search for the best driver in
these locations.” and “Include this
location in the search:”.
5 Specify “R:\USBDRV\WIN2KXP”, then
click “Next”.
6 Click “Finish” to complete the
installation.
68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sharp ve cg 40 f wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info