Bedienungsanleitung Sharp XG-C435X-L (Seite 54 von 73) (Englisch)

543352

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

-52

Helpful Functions Set during Installation (“PRJ-ADJ” menu)

Menu operation Page 43

Setting/Changing the keycode

1 Select “System Lock”, then press

ENTER or

2 Select “Next”, then press ENTER.

• The screen for entering the keycode appears.

3 Press the 4 buttons on the remote

control or on the projector to enter

the preset keycode in “Old Code”.

• When setting the keycode for the first time,

press " on the projector for four times.

Note

• If you input a wrong keycode, the cursor

returns to the first point of the “Old Code”.

• The preset keycode is 4 " buttons on the

projector. When you press the " button four

times, the keycord input screen disappears.

4 Press the 4 buttons on the remote

control or on the projector to enter

the new keycode in “New Code”.

Note

• You cannot use the following buttons for

keycode: STANDBY/ON, ON, STANDBY,

ENTER, L-CLICK, R-CLICK/RETURN,

MENU, ECO+QUIET and BREAK TIMER

• System lock function recognizes each

button on the remote control or on the

projector as an individual button, even if

they share the same button name. If you

used the buttons on the projector in set-

ting your keycode, the keycode cannot

be canceled with the remote control.

Setting the System Lock

Old Code

New Code

Reconfirm

––––

PRJ-ADJ

Setting the System Lock

Old Code

New Code

Reconfirm

****

–––

––––

–

Selecting the Transmis-

sion Speed (RS-232C)

Make sure that both the projector and computer

are set for the same baud rate.

Description

Transmission speed is slow.

Transmission speed is rapid.

Selectable items

9600 bps

38400 bps

115200 bps

Note

• Refer to the “SETUP MANUAL” contained on

the supplied CD-ROM for RS-232C Specifica-

tions and Command Settings.

• Refer to the computer’s operation manual for

instructions for setting the computer’s baud rate.

Fan Mode Setting

This function changes the fan rotation speed.

Description

Suitable for normal environments.

Select this when using the projector at

altitudes of approximately 1,500 meters

(4,900 feet) or more.

Selectable items

Normal

High

When “Fan Mode” is set to “High”, the fan rotation

speeds up, and the fan noise becomes louder.

System Lock Function

This function prevents unauthorized use of the

projector. Once this function is activated, users

must enter the correct keycode each time the pro-

jector is turned on. We suggest you record the

keycode in a safe place where only autho-

rized users have access.

Info

• If you lose or forget your keycode, contact your

nearest Sharp Authorized Projector Dealer or Ser-

vice Center (see page 68). Even if the product

warranty is valid, the keycode reset will incur a

charge.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp XG-C435X-L Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info