Bedienungsanleitung Sharp XG-P560W-N (Seite 12 von 86) (Englisch)

469882

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

-10

Using the projector in other countries

■ The power supply voltage and the shape of

the plug may vary depending on the region

or country you are using the projector in.

When using the projector overseas, make

sure you use an appropriate power cord for

the country you are in.

Temperature monitor function

■

If the projector starts to over-

heat due to setup problems or

blockage of the air vents, “ ”

and “ ” will illuminate in

the lower left corner of the picture. If the tem-

perature continues to rise, the lamp will turn off,

the temperature warning indicator on the pro-

jector will blink, and after a 90-second cooling-

off period the projector will enter the standby

mode. Refer to “Maintenance Indicators” on

page 69 for details.

Info

• The cooling fan regulates the internal tem-

perature, and its performance is automati-

cally controlled. The sound of the fan may

change during projector operation due to

changes in the fan speed. This does not

indicate malfunction.

• Even if you unplug the power cord after

projector operation, the cooling fan con-

tinues to run for a while. When you place

the projector into the storage case, make

sure that the cooling fan has stopped.

Optional lens installation

■ For installing an optional lens, refer to “At-

taching the Optional Lens” on page

or the

lens installation manual (supplied with the

optional lens).

■ Remove the optional lens when carrying the

projector. Carrying the projector with an op-

tional lens attached can cause the projector

to be damaged by vibration or other factors.

Do not block the intake and exhaust

vents.

■ Allow at least 11

/16 inches (30 cm) of space

between the exhaust vent and the nearest

wall or obstruction.

■ Set up the projector where air will not stay

near its exhaust vent. In order to avoid allow-

ing the heat from the exhaust vent to enter

the intake vent area, leave at least more than

/16 inches (30 cm) of space between the

intake vent and the surrounding walls or ob-

jects.

■ If the cooling fan becomes obstructed, a pro-

tection circuit will automatically put the pro-

jector into standby mode to prevent overheat

damage. This does not indicate a malfunc-

tion (See pages 69 and 70.). Remove the pro-

jector power cord from the wall outlet and wait

at least 10 minutes. Place the projector where

the intake and exhaust vents are not blocked,

plug the power cord back in and turn on the

projector. This will return the projector to the

normal operating condition.

Caution regarding usage of the projector

■

When using the projector, take care not to subject

it to hard impact and/or vibration, as this can result

in damage. Take extra care with the lens. If you are

not to use the projector for a long time, make cer-

tain you unplug the power cord from the wall outlet,

and disconnect any other cables connected to it.

■ Do not carry the projector by holding the lens.

■ When storing the projector, ensure you at-

tach the lens cap or dustproof cap to the pro-

jector. (See page 13.)

■ Do not expose the projector to direct sunlight

or near heat sources. The projector may

change color or become deformed.

Other connected equipment

■ When connecting a computer or other audio-

visual equipment to the projector, make the

connections AFTER unplugging the power

cord of the projector from the AC outlet and

turning off the equipment to be connected.

■ Please read the operation manuals of the pro-

jector and the equipment to be connected for

instructions on how to make the connections.

IMPORTANT SAFEGUARDS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp XG-P560W-N Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp XG-P560W-N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info