Bedienungsanleitung Sharp XL-B710 (Seite 8 von 56) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch)

745389

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

General Operation

Standby/ON

When you  rst connect the unit to the mains socket, the unit will be in

STANDBY mode. Press the

button on the remote control to switch the

main unit ON or OFF.

• When turning the system on, the system will start in the same mode as

during switch o .

• Disconnect the mains plug from the mains socket if you want to switch

the unit o completely.

• If there is no signal under the CD, USB, BT (Bluetooth) or AUX mode,

the unit will automatically switch o within 15 minutes.

Select Modes

Press the button repeatedly on the unit or press the CD/AUX, FM, USB

or BT PAIR buttons on the remote control to select the desired mode. The

selected mode will show on the display.

Adjust the Volume

• Press the VOL +/– buttons on the remote control or turn the VOLUME

+/- dial on the unit to adjust the volume.

• If you wish to turn the sound o , press the

button on the remote

control. Press the

button again or press VOL+/- button on the remote

control or turn the VOLUME +/- dial on the unit to resume normal

volume.

Select the Equaliser

Press the EQ button on the remote control or on the unit repeatedly to

select: [Pop] - [Classic] - [Jazz] - [Rock] - [Flat]

Adjust the Brightness

Press the DIMMER button on the remote control to select brightness level.

Adjust the Bass

Press the BASS button on the remote control to enable and disable the

bass enhancement.

Set the Sleep Timer

This unit can switch to standby automatically after a set period of time.

1. Press the TIMER/SLEEP button on the remote control repeatedly to

select your desired time. The number of minutes will display in below

sequence: SLEEP 90 -> SLEEP 60 -> SLEEP 30 -> SLEEP 15 -> SLEEP 00

2. Stop pressing the SLEEP button when your desired time is displayed.

The sleep timer is now set.

 Press the SLEEP button to view the remaining time before switch o .

 To cancel the sleep timer, press the SLEEP button

repeatedly until “SLEEP 00” shows on the display.

AUX Operation

1. Ensure that the unit is connected to the TV or audio device.

2. Press the

button on the main unit repeatedly or press the CD/AUX

button on the remote control to select AUX mode.

3. Operate your audio device directly for playback features.

4. Press the VOL +/– button to adjust the volume to your desired level.

CD/USB Operation

Tips:

• Supported MP3-CD formats is MP3 / CD.

• Unsupported  le formats are skipped. For example, Word documents

(.doc) or MP3  les with extension .dlf are ignored and not played.

• USB supports maximum memory is 64GB.

CD Operation

1. Press the button repeatedly on the unit or press the CD/AUX

button on the remote control to select DISC mode.

2. Press the

button on the unit or on the remote control and the disc

tray will open automatically.

3. Place the CD/MP3 disc with the label side up into the CD

compartment, and then press the

button on the unit or on the

remote control to close the disc tray.

 The current playing time of the track will be shown on the display,

and unit will play the  rst track on the CD/MP3 disc automatically.

 If there is no disc or the disc can’t be read,

“NO DISC” will show on the display.

USB Operation

1. Insert the USB stick on the back of the unit.

2. Press the

button on the main unit repeatedly or press the USB

button on the remote control to select USB mode.

Play Control

• To stop play, press the button on the remote control. The total tracks

of the CD will show on the display.

• To pause or resume play, press the

button on the unit or the /

SCAN button on the remote control.

• To skip to the previous/next track, press the

/ buttons on the unit

or on the remote control.

• Press and hold the

/ buttons on the unit or on the remote control

to perform fast forward/reverse playback. Release the button to resume

normal playback.

• Press the ALBUM/PRESET

, buttons to skip to the previous/next

album (only for MP3/WMA discs).

• Press the INFO button on the remote control to display the current play

information.

Intro Playback

• Press the INTRO button on the remote control. The unit will play the  rst

10 seconds of each track.

• Press the INTRO button on the remote control again to resume normal

playback.

Random Playback

• Press the SHUFFLE button on the remote control or the MODE button

on the unit to switch the randomly play the song ON/OFF.

 SHUFFLE: Randomly play the song. “

” lights up.

 SHUF OFF: Randomly turned o .

Select repeat play options

Press the REPEAT button repeatedly on the remote control or the MODE

button on the unit to select

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp XL-B710 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp XL-B710

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info