679562
9
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
EN
Select repeat play options
Press the REPEAT button repeatedly on the remote control or the MODE
button on the unit to select
Repeat play modes. The selected mode will show on the display.
RPT ONE: Repeat current track.
lights up.
RPT ALB: Repeats all tracks in a folder (if a
folder is displayed)
blinks.
RPT ALL: Repeat all tracks.
“ lights up.
RPT OFF: Repeat turned o .
Playback order Settings
The user can program up to 20 tracks in CD/USB mode in any desired order.
The playback order settings are only accessible when playback has been
stopped.
1. Press the
button on the remote control.
2. Press the PROG button on the remote control or on the unit to enter
MEMORY mode.
3. Press the number (0~9) buttons or
/ buttons on the remote
control or on the unit to select the track that you want to preset, then
press PROG button to con rm.
4. Repeat step 3 to program more tracks.
5. Press the
button to playback programmed tracks.
If you want to change the programed  les:
Press the
button two times to clear the current program  les, display
shows "PRG CLR" , then repeat the program steps as above to re-enter
the new program  les.
Open the CD door to clear the current program  les.
Bluetooth operation
The  rst time you connect your Bluetooth device to this player, you need to
pair your device to this player.
Note:
The operational range between this player and a Bluetooth device is
approximately 8 meters (without any object between the Bluetooth
device and the unit).
Before you connect a Bluetooth device to this unit, ensure you know the
device’s capabilities.
Compatibility with all Bluetooth devices is not guaranteed.
Any obstacle between this unit and a Bluetooth device can reduce the
operational range.
If the signal strength is weak, your Bluetooth receiver may disconnect,
but it will re-enter pairing mode automatically.
Pair Bluetooth-enabled Devices
1. Press the button on the main unit repeatedly or press the BT/
PAIR Button on the remote control to select BT (Bluetooth) mode. NO
BT will show on the display if the unit is not paired to any Bluetooth
device.
2. Activate your Bluetooth device and select the search mode. XL-
B715D will appear on your Bluetooth device.
If you cannot  nd the unit, press and hold the "BT/
PAIR" button on the remote control or the "
" button
on the unit to be searchable. The display will show
PAIRING and you will hear "Pairing" from the unit.
3. Select “XL-B715D in the pairing list. After successful pairing, you will
hear "Paired" from the unit and the display panel shows BT”.
4. Play music from the connected device.
To disconnect the Bluetooth function, you can:
Switch to another function on the unit.
Disable the Bluetooth function on your device.The device is successfully
disconnected from the unit after the Disconnected voice prompt.
- Press and hold the BT/PAIR button on the remote control or the "
" button on the unit.
Tips:
Enter "0000" for the password if necessary.
If a connection exist, press and hold the "BT/PAIR" button on the
remote control or the "
" button on the unit to re-activate the pairing
mode, the current connection will be interrupted.
If no other Bluetooth device pairs with this player in 2 minutes, the
player will reconnect to the previous connection.
The player will also be disconnected when your device is moved beyond
the operational range.
If you want to reconnect your device to this player, place it within the
operational range.
If the device is moved beyond the operational range, when it is brought
back, please check if the device is still connected to the player.
If your device and this player are connected, display panel shows "BT".
If the connection is lost, display panel shows "NO BT". Follow the inst-
ruction above to pair your device to the player again.
Listen to Music from Bluetooth Device
If the connected Bluetooth device supports Advanced Audio Distri-
bution Pro le (A2DP), you can listen to the music stored on the device
through the Micro Component System.
If the device also supports Audio Video Remote Control Pro le (AVRCP),
you can use the Micro Component System remote control to play music
stored on the device.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
To pause/resume play, press the
button on the unit or the /SCAN
button on the remote control.
To skip to a track, press the
, buttons on the unit or on the
remote control.
FM Operation
Note:
Pressing the STEREO/MONO button, the unit will automatically switch
the Stereo or Mono channel to receive the FM radio mode, it can get the
best e ect.
Auto Scan and Save Preset Station
1. Press the button on the main unit repeatedly or press the FM/DAB
button on the remote control to select FM mode.
2. Press the
/SCAN button on the remote control to activate
automatic programming. All available stations are programmed in the
order of waveband reception strength.
The  rst programmed radio station is played automatically.
Tune to a Preset Radio Station
3. Press the
, buttons to select number that you want.
4. Press the
button on the unit, or /SCAN button on the remote
control to con rm.
Tuning in a Station
Tune in radio stations automatically
Press and hold the
/ buttons, the frequency changes
down or up automatically until a station is found.
The search may not stop at a station with a very weak signal.
Tune in radio stations manually
Press the
/ buttons repeatedly until
you  nd the station you want.
If reception is still poor, try to adjust the position of the
aerial or try to move the radio to another location.
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

sharp-xl-b715d

Suche zurücksetzen

  • Mein Dimmer geht nicht Heller zu Stellen ist alles nur Dunkel. Kann ich nicht einstellen Eingereicht am 25-7-2023 10:49

    Antworten Frage melden
  • Ich finde keine Einstellung der Tonqualität für Höhe und Tiefe Eingereicht am 21-4-2023 08:53

    Antworten Frage melden
  • Obwohl der Stecker steckt und Radio ,CD… laufen, bleibt das Display schwarz. Was kann ich tun? Eingereicht am 22-6-2022 09:56

    Antworten Frage melden
  • Das Radio soll in der Küche verwendet werden, was für eine Antenne hat das Radio Eingereicht am 7-2-2021 18:27

    Antworten Frage melden
  • ich möchte den Ausgang (AUX) an eien Verstärker anschließen, hat aber nicht funktioniert. Was muss ich machen ? Eingereicht am 11-1-2021 12:39

    Antworten Frage melden
  • Hallo, habe mir dieses Radio die letzte Woche gekauft. Leider kann ich keine Dab Sender hören. UKW Sender funktionieren auch CD. Der Klang ist sehr gut. Warum kann ich keine Dab Sender hören? Eingereicht am 6-12-2020 16:52

    Antworten Frage melden
  • Netzstecker steckt in der Steckdose und Spannung liegt an. Trotzdem bleibt das Display dunkel nachdem das Gerät mit der Fernbedienung oder direkt eingeschaltet wird.
    was ist defekt? Gibt es eine Sicherung? Eingereicht am 29-7-2020 20:08

    Antworten Frage melden
  • Bei dab einstellung erscheint bei der sendereinstellung off line Eingereicht am 22-3-2020 16:39

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sharp XL-B715D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sharp XL-B715D

Sharp XL-B715D Kurzanleitung - Alle Sprachen - 40 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info