Bedienungsanleitung Sharp XL-BB20D (Seite 8 von 136) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch)

679563

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

EN-7

General control (continued)

■ Volume auto fade-in

If you turn off and on the main unit with the volume set to

27 or higher, the volume starts at 15 and fades in to the

last set level.

■ Volume control

Turn the volume knob towards VOL +/– (main unit) or

press VOL +/– (remote control) to increase or decrease

the volume.

■ Muting

To mute the volume, press the button (remote control).

Press again to restore the volume.

■ Direct key power on function

When you press any of the following buttons, the unit turns on.

● CD / , USB / , BLUETOOTH / , AUDIO/LINE

(INPUT), TUNER [DAB]: Selected function is activated.

● / (main unit): The unit turns on and playback of the last

function will start (CD, USB, BLUETOOTH, AUDIO IN,

LINE IN, TUNER, DAB)

● (OPEN/CLOSE) (on main unit/remote control): Disc

tray opens and the last selected function is activated.

■ Auto power off function

The main unit will enter the standby mode after approxi-

mately 15 minutes of inactivity during:

Audio In/Line In: No detection of input signal.

CD: In the stop mode or no disc.

USB: In the stop mode or no media.

Bluetooth: - No connection after approximately 15 minutes.

- In the pause or stop mode and no incoming sig-

nal from device after approximately 15 minutes.

■ Bass or Treble control

Press the BASS or TREBLE button to select “Bass” or

“Treble” respectively.

2 Within 5 seconds, press the VOL (+ or –) button to adjust the

bass or treble.

- 5 ↔ - 4

........

↔ + 4 ↔ + 5

- 5

↔

- 4

........

↔ +

Press SOUND (DEFAULT) button to return sound to

default settings. “SOUND DEFAULT” appears on the

display.

Sound default settings : Bass = 0, Treble = 0

■ Function

Press the INPUT button (main unit) repeatedly to select

desired function.

CD FM MONOFM STEREO

USBAUDIO INLINE INBLUETOOTH

DAB

Note:

The backup function will protect the memorised function

mode for a few hours should there be a power failure or

the AC power lead becomes disconnected.

Remote control

■ Battery installation

1 Open the battery cover.

2 Insert the batteries according to the terminal indicated in

the battery compartment. When inserting or removing the

batteries, push them towards the (–) battery terminals.

3 Close the cover.

Caution:

● Replace all old batteries with new ones at the same

time.

● Do not mix old and new batteries.

● Remove the batteries if the unit will not be used for a

long period of time. This will prevent potential damage

due to battery leakage.

● Do not use rechargeable batteries (nickel-cadmium

battery, etc.).

● Installing the batteries incorrectly may cause the unit

to malfunction.

● Batteries (battery pack or batteries installed) shall not

be exposed to excessive heat such as sunshine, re

or the like.

Notes concerning use:

● Replace the batteries if the operating distance is re-

duced or if the operation becomes erratic. Purchase 2

“AAA” size batteries (UM/SUM4, R3, HP-16 or similar).

● Periodically clean the transmitter on the remote control

and the sensor on the unit with a soft cloth.

● Exposing the sensor on the unit to strong light may in-

terfere with operation. Change the lighting or the direc-

tion of the unit.

● Keep the remote control away from moisture, heat,

shock, and vibrations.

■ Test of the remote control

The remote control can be used within the range shown below:

Remote sensor

0.2 m - 6 m

General control

■ To turn the power on

Press the (ON/STANDBY) button to turn the power on or

off.

■ Display brightness control

Press the DIMMER button (remote control).

Dimmer 1

Dimmer 2

Dimmer off

(Display is dim).

(Display is bright).

(Display gets dimmer).

XL-BB20D_OM_EN_DE_ES_FR_IT_PL.indb 7 2018-01-25 10:09:51

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp XL-BB20D Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp XL-BB20D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info