Bedienungsanleitung Sharp XL-UH12H (Seite 15 von 16) (Englisch)

526649

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

E-14

Sudden temperature changes, storage or operation in an

extremely humid environment may cause condensation

inside the cabinet (CD pickup, etc.) or on the transmitter on

the remote control. Condensation can cause the unit to

malfunction. If this happens, leave the power on with no

disc in the unit until normal playback is possible (about 1

hour). Wipe off any condensation on the transmitter with a

soft cloth before operating the unit.

When this product is subjected to strong external

interference (mechanical shock, excessive static

electricity, abnormal supply voltage due to lightning, etc.)

or if it is operated incorre

ctly, it may malfunction.

If such a problem occurs, do the following:

1 Set the unit to the stand-by mode and turn the power on

again.

2 If the unit is not restored in the previous operation,

unplug and plug in the unit again, and then turn the

power on.

Note:

If neither operation above restores the unit, clear all the

memory by resetting it.

Caution:

This operation will erase all data stored in memory

including clock, timer settings, tuner preset, and CD

programme.

Remove the USB memory device and disc from the unit.

Then, set the unit to the power stand-by mode. Carryi ng

the unit with the USB memory device or disc left inside can

damage the unit.

Compact discs are fairly resistant to damage, however

mistracking can occur due to an accumulation of dirt on the

disc surf

ace. Follow the guidelines below for maximum

enjoyment from your CD collection and player.

● Do not write on either side of the disc, particularly the

non-label side from which signals are read. Do not

mark this surface.

● Keep your discs away from direct sunlight, heat, and

excessive moisture.

● Always hold the CDs by the edges. Fingerprints, dirt, or

water on the CDs can cause noise or mistracking. If a

CD is dirty or does not play properly, clean it with a soft,

dry cloth, wiping straight out from the centre, along the

radius.

Periodically wipe the cabinet with a soft cloth and a diluted

soap solution, then with a dry cloth.

Caution:

● Do not use chemicals for cleaning (petrol, paint thinner,

etc.). It may damage the cabinet.

● Do not apply oil to the inside of the unit. It may cause

malfunctions.

Troubleshooting chart (continued)

■ USB

Symptom Possible cause

● Device cannot be

detected.

● Is there any MP3/WMA file

available?

● Is the device properly

connected?

● Is it an MTP device?

● Does the device contain AAC

file only?

● Playback does not

start.

● Is it a copyright protected

WMA file?

● Is it a false MP3 file?

● Wrong time

display.

● Wrong file name

display.

● Is Variable Bitrate file being

played back?

● Is the File Name written in

Chinese or Japanese

characters?

■ Condensation

■ If problem occurs

■ Factory reset, clearing all memory

Press the ON/STAND-BY button to turn the power on.

2 Press the FUNCTION button repeatedly to select

AUDIO IN function.

3 Press the button on the main unit then press and

hold down the / button until “RESET” appears.

■ Before transporting the unit

■ Care of compact discs

Maintenance

■ Cleaning the cabinet

NO YES

Correct

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp XL-UH12H Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp XL-UH12H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info