Bedienungsanleitung Sherwood BDP-904 (Seite 6 von 44) (Englisch)

572491

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

ENGLISH

■About video/HDMI OUT jacks

• You don’t need to make all kinds of video connections

between components. (e/ g., this unit to A/V amplifier, A/V

amplifier to TV and so on.)

Depending on what kinds of video jacks that A/V amplifier

TV, etc. has, we recommend you to make the same kinds

of video connections between components.

■About audio/HDMI OUT jacks

• You don’t need to make all kinds of audio connections.

Connect this unit to A/V amplifier depending on the audio

input jack that A/V amplifier has.

1. Connecting AUDIO OUTs

• Connect these jacks to the AUDIO IN jacks of BD(DVD,

CD, etc.) of your amplifier.

2. Connecting DIGITAL AUDIO OUTs

• Connect either the OPTICAL or the COAXIAL DIGITAL

OUT jack to the corresponding DIGITAL IN jack of your

amplifier. (You don’t need to do both.)

■Notes :

• When your amplifier is not compatible with the digital

signals that are output from this unit, loud noise or no

sound may be heard from the speakers, and it may be

harmful to your ears and damages the speakers. To

prevent it, you should disconnect the DIGITAL OUTs to

your amplifier and make analog audio connection.

• When making the COAXIAL DIGITAL connection, be sure

to use a 75Ω COAXIAL cord, not a conventional AUDIO

cord.

3. Connecting COMPOSITE VIDEO OUT

• Connect this jack to the (composite)VIDEO IN jack of your

amplifier or TV.

4. Connecting COMPONENT VIDEO OUTs

• Connect these jacks to the COMPONENT VIDEO OUT

jacks of your amplifier or TV.

• When making COMPONENT VIDEO connections,

connect “Y” to “Y”, “PB” to “PB” (, “Cb”, “B-Y”), “PR” to “PR”

(, “Cr”, “R-Y”).

■Notes :

• If the resolutions of the video signals which are output

from the COMPONENT VIDEO OUTs and/or the HDMI

OUT and your TV are not matched, the picture is not

clear, natural or displayed.

To prevent it, you should set the Resolution to one which

the TV can handle. (For details, refer to “SETTING THE

DISPLAY” on page 30.)

• Do not connect the unit to the TV through a VCR.

Otherwise the picture may be disturbed due to the copy

protection function.

5. HDMI OUT CONNECTOR

• Refer to “CONNECTING TO TV WITH HDMI IN

CONNECTOR” on next page.

6. LAN CONNECTOR

• Refer to “CONNECTING TO NETWORK” on page 9.

7. AC INPUT CORD

• Plug the cord into a wall AC outlet.

Jack type Video resolution

High

quality

Digital

High Definition :

1080/24p, 1080p, 1080i, 720p

Standard Definition :

80p(/576p), 480i(/576i)

Analog

High Definition :

080i, 720p

tandard Definition :

480p(/576p), 480i(/576i)

Standard

quality

Standard Definition :

480i(/576i)

Jack type

High

quality

Digital

Standard

quality

Analog

BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sherwood BDP-904 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sherwood BDP-904

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info