ENGLISH
50
When selecting the SUBWOOFER MODE
• "SW PLUS＋" mode is valid only when "FRONT" and "CENTER" are set to "FULL RANGE" and
"SUBWOOFER" is set to "YES" on the SPEAKER/ROOM EQ SETUP menu. (For details, refer to "SETTING
THE SPEAKER/ ROOM EQ SETUP" on page 58.)
NORMAL : When the low frequency signals of channels set to "FULL RANGE " are reproduced from those
channels only. In this mode, the low frequency signals that are reproduced from the subwoofer
channel is only the low frequency signals of LFE (from the multi-channel sources that contains LFE
(Low Frequency Effects) channel, also called the ".1" channel) and the channels set to the setting
value other than "FULL RANGE".
SW PLUS＋ : When the low frequency signals of channels set to "FULL RANGE" are reproduced
simultaneously from those channels and the subwoofer channel.
In this mode, the low frequency range expands more uniformly through the room, but depending
on the size and shape of the room, interference may result in a decrease of the actual volume of
the low frequency range.
• The HDMI connection can carry uncompressed digital video signals and digital audio signals.
Depending on whether the digital audio signals are output from the HDMI MONITOR OUT of this receiver or
not, you should set the HDMI AUDIO OUT correctly.
• Depending on the AUDIO MODE setting, when outputting the HDMI digital audio signals, the PCM 2 channel
digital audio signals are output from the HDMI MONITOR OUT regardless of the signal format of digital audio
signals input into the HDMI IN.
• This unit can convert the analog audio signals (which are input into the (analog) AUDIO INs) or the digital
audio signals (which are input into the OPTICAL or the COAXIAL DIGITAL IN) to the PCM 2 channel signals
and output them from the HDMI MONITOR OUT, too. (For details, refer to "When selecting the AUDIO MODE"
on page 55.)
OFF : Not to output the digital audio signals from the HDMI MONITOR OUT of this receiver, meaning these
signals are heard from the speakers connected to this receiver.
ON : To output PCM 2 channel digital audio signals depending on the AUDIO MODE setting, meaning these
signals are heard from the speakers of your TV.
Note:
• When the HDMI AUDIO OUT is set to ON, no sound will be heard from the speakers connected to this
receiver (except ROOM 2 speakers) even though any input source is selected.
OFF : To listen to a program source without the tone effect. ("TONE" goes off.)
ON : To adjust the tone for your taste. ("TONE" lights up.)
When selecting the TONE CONTROL
When selecting the HDMI AUDIO OUT
■When the TONE CONTROL is set to ON to adjust the tone (bass and treble)
①. Press the ENTER button to enter the tone adjustment mode.
Continued
