Bedienungsanleitung Sherwood R-904N NetBoxx (Seite 48 von 63) (Englisch)

459227

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

ENGLISH

SETTING THE SYSTEM

• AMP (AMP ASSIGN) : To assign the surround back channels' power amplifier correctly depending on how to use the speakers.

• TONE : To adjust the tone (bass and treble) as desired.

• PWR-M (POWER MANAGER) : To set the POWER MANAGER mode depending on how to use the VuNow for power saving.

■When selecting the AMP ASSIGN

• The surround back channels' power amplifier can drive the surround back speakers or the ROOM 2 speakers. Depending on

how to use the speakers, you should assign the power amplifier correctly. (For details, refer to “CONNECTING SPEAKERS” on

page 8 and “CONNECTING ROOM2 SPEAKERS” on page 9.)

BACK (SURROUND BACK) : To drive the surround back speakers when connecting the SURROUND BACK/ROOM2 channels

to them.

R2 (ROOM2) : To drive the ROOM2 speakers when connecting the SURROUND BACK/ROOM2 channels to them.

■When selecting the TONE

OFF : To listen to a program source without the tone effect. (“DIR” lights up.)

↕

ON : To adjust the tone for your taste. (“DIR” goes off.)

◆When the TONE CONTROL is set to ON to adjust the tone (bass and treble)

①. Press the ENTER button to enter the tone adjustment mode.

• Then “TRE ~” will be displayed.

②. Press the CURSOR UP/DOWN buttons to select the desired tone mode.

③. Press the CURSOR LEFT/RIGHT buttons to adjust the selected tone as desired.

• The tone level can be adjusted within the range of -10 ~ +10 dB.

• In general, we recommend the bass and treble to be adjusted to 0 dB (flat level).

• Extreme settings at high volume may damage your speakers.

• To complete tone adjustment, repeat the above steps ② and ③.

■When selecting the POWER MANAGER

→ OFF : To turn on the VuNow circuitry constantly when this unit is turned on.

↕

60 / 30 / 10 : If the specified period of time elapses after selecting the input source other than VuNow, the VuNow circuitry will

↕ be turned off.

→ ON : To turn on the VuNow circuitry when the VuNow is selected as an input source.

1. Press the CURSOR UP/DOWN buttons to select the desired item.

2. Press the CURSOR LEFT/RIGHT buttons to set the selected item as desired.

SET RMEQ

MLT ROOM

AMP : BACK / R2

TONE : OFF / ON

PWR-M : OFF / 60 / 30 / 10 / ON

F : LARGE / SMALL

C : LARGE / SMALL / NO

S : LARGE / SMALL / NO

SB : LX2 / LX1 / SX2 / SX1 / NO

SW : YES / PLUS / NO

TRE : 0 / -10 ~ +10

BASS : 0 / -10 ~ +10

ROOM2 : OFF / ON

R2 : TUNER / CD / AUX / F.AUX / VIDEO 1/ V2/IPD

R2VOL : 40 / MIN(0) ~ MAX(80)

SPK CFG

X.OVER X.OVER : 50 / 80 / 100 / 150 / 200

CH LEVEL

DISTANCE

T. TONE : M / A

L : 0 dB / -15 ~ +15

C : 0 dB / -15 ~ +15

R : 0 dB / -15 ~ +15

SR : 0 dB / -15 ~ +15

SBR : 0 dB / -15 ~ +15

SBL : 0 dB / -15 ~ +15

SL : 0 dB / -15 ~ +15

SW : 0 dB / -15 ~ +15

L : 10.0 FT / 0.1 ~ 30.0

C : 10.0 FT / 0.1 ~ 30.0

R : 10.0 FT / 0.1 ~ 30.0

SR : 10.0 FT / 0.1 ~ 30.0

SBR : 10.0 FT / 0.1 ~ 30.0

SBL : 10.0 FT / 0.1 ~ 30.0

SL : 10.0 FT / 0.1 ~ 30.0

SW : 10.0 FT / 0.1 ~ 30.0

↕

R-904N(A)_ENG_091007:R-904N(A) 2009-10-14 오후 1:53 페이지 48

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sherwood R-904N NetBoxx Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info