31
3. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to
set the selected item as desired.
2. Press the CURSOR UP(▲)/DOWN(▼) buttons to
select the desired item.
ENGLISH
SETTING THE INPUT
• D.IN (DIGITAL IN) : To assign the connected DIGITAL INs to the desired input.
• AUTO (AUTO SURROUND) : To select the auto surround mode or the manual surround mode.
• RETURN : To return to the previous menu.
• You should assign the connected DIGITAL INs to the desired of CD and VIDEO 1.
(For details, refer to "CONNECTING DIGITAL INs" on page 5.)
• You can select the desired of OPT (optical), COAX(coaxial) and ANL (analog).
Notes :
• In such a case that a DIGITAL IN is assigned to two input sources or more, when these input sources are selected, the digital audio
signals can be heard from the same DIGITAL IN.
• When TUNER, TAPE or VIDEO 2 is selected as an input source, the digital input(“OPT”, “COAX”) cannot be selected.
When selecting the DIGITAL IN
• Depending on how to select a surround mode, you can select the auto surround mode or the manual surround mode.
OFF (Manual surround mode) : You can select the desired of different surround modes selectable for the signal being input with
using the SURROUND MODE UP/DOWN (▶, > /◀, <) buttons.
(For details, refer to "ENJOYING SURROUND SOUND" on page 15.)
ON
(Auto surround mode) : The optimum surround mode will be automatically selected depending on the signal format being input.
Notes :
• Even when the auto surround mode is selected and the same type of digital signal format is being input, the optimum surround mode
may vary depending on whether the speaker type is set to "N (None)" or not.
• When 96 kHz PCM digital signal is being input, only the stereo mode will be selected.
When selecting the AUTO SURROUND
1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired input source, then press the ENTER button.
Example) When selecting the CD
