37
ENGLISH
SETTING THE VIDEO SETUP
When selecting the VIDEO OUT
• This unit has three types of video jacks (COMPONENT, S-VIDEO, (composite) VIDEO).
For some countries like Europe, this unit has the A/V SCART OUTPUT, too.
• Depending on how to connect the video jack(s) to the A/V amplifier/receiver/TV, you should set the VIDEO OUT correctly.
Notes:
• The COMPONENT VIDEO OUTs of this unit can output either conventional interlacing (simply called Interlaced) video signals
or progressively scanned (simply called Progressive) video signals (that can reproduce high-density pictures with less flicker).
Therefore, when connecting the COMPONENT VIDEO OUTs to the Interlaced (non-progressive) COMPONENT VIDEO INs of
your TV, projector, etc., you should set the VIDEO OUT to the COMPOSITE.
When connecting them to the Progressive COMPONENT VIDEO INs, you should set to the P-SCAN YPbPr.
• If the VIDEO OUT setting does not match to the video connetion you made, no picture or abnormal picture may be shown.
Should this happen, press the SETUP button to exit the setup mode, then press the PROGRESSIVE SCAN button calmly
and repeatedly until the picture will be shown, or connect your component to the (composite) VIDEO OUT that can output the
normal video signals regardless of the VIDEO OUT setting. (Refer to "SELECTING THE VIDEO OUTPUT SIGNAL" on
page 27.)
• Because the A/V SCART OUTPUT connector of this unit can output RGB or composite (regular) video signals, you can set the
VIDEO OUT to SCART-RGB or COMPOSITE depending on your TV. (For details, refer to the operating instructions of your
TV.)
When selecting the TV TYPE
• When you connect a normal TV with 4:3 aspect ratio to the unit, select either "4:3 LETTERBOX" or "4:3 PAN-SCAN" and
when you connect a wide TV with 16:9 aspect ratio, select "16:9 WIDE".
1
Press the CURSOR ▲/▼ buttons to select the preferred item.
• Then the setting menu of the selected item is displayed.
•VIDEO OUT: When outputting the corresponding video signal from the
connected VIDEO OUT jack(s).
•TV TYPE: When selecting a picture size according to the aspect ratio of your
TV's screen.
•CLOSED CAPTION: When turning on or off the display of the closed captions
recorded on DVD.
•COMPOSITE: When outputting the composite video signals from the
VIDEO OUT jack or the Interlaced video signals from the
COMPONENT VIDEO OUT jacks.
•SCART-RGB (Regional Option): When outputting the RGB video signals from
the A/V SCART OUTPUT connector.
•P-SCAN YPbPr: When outputting the Progressive video signals from the
COMPONENT VIDEO OUT jacks.
•S-VIDEO: When outputting the S-Video signals from the S-VIDEO OUT jack.
•4:3 PAN-SCAN: DVD Videos recorded with the 16:9 aspect ratio and the pan-
scan specification are reproduced in the pan-scan screen
which automatically trims the left and right of picture.
•4:3 LETTERBOX: DVD Videos recorded with the 16:9 aspect ratio are
reproduced in the letter box screen which has black bands
on the top and bottom.
•16:9 WIDE: DVD Videos recorded with the 16:9 screen are reproduced by filling
the TV screen.
Note: Depending on some DVD Videos, the playback picture may not conform to
the TV aspect setting you select.
