Bedienungsanleitung Sherwood VR-654BD (Seite 51 von 62) (Englisch)

572502

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

ENGLISH

[BD PLAYER SECTION]

PROBLEM POSSIBLE CAUSE REMEDY

o playback

Malfunction

No picture

Noisy or distorted picture

Abnormal picture or no

picture

Slight pause of picture

Noisy or distorted sound

BD-LIVE contents

cannot be loaded

•

The disc is loaded upside down.

• The disc is not playable.

• The disc is dirty.

• The recorded disc is not correctly finalized.

• The parental level is not set correctly.

• The symbol about invalid operation is displayed.

• The disc is scratched, dirty badly or unplayable.

• The video cords are disconnected.

• The incorrect selection of input source on the TV.

• The disc is not playable.

• The unit is connected to a VCR directly and the

copyguard function is activated.

• The disc is dirty.

•

It is in rapid advance or reverse playback, or in frame

dvance playback.

• The resolution is not set correctly for video signals to

be output form the COMPONENT and the HDMI

OUTs.

• The TV does not support HDCP.

• The TV type of this unit is different from that of your

TV or the disc.

• The layer transition occurs during playback of DVD

Videos, etc. recoded in dual-layer format.

• The disc is dirty.

• Poor connections between this unit and broadband

router and/or modem.

• The USB memory device is disconnected.

• The BD-Live Internet Access is set to “Prohibit

Access”.

• The BD disc does not support BD-LIVE.

• The network settings are not set correctly.

•

Reload the disc with the printed side up.

•

Use a playable disc.

•

Clean the disc.

• Load a disc that is correctly finalized.

• Set the parental level setting correctly.

(Refer to “SETTING THE PARENTAL CONTROL”

on page 44.)

•

Adjust the setting correctly.

(

Refer to “SYMBOL ABOUT INVALID OPERATION”

on page 25.)

• Press the POWER ON/STANDBY button to turn the

power off, press this button again and then unload the

disc.

•

Connect the cords correctly.

• Select the input source correctly.

• Use a playable disc.

• Connect the unit so that the picture signal is

transferred directly to the TV.

• Clean the disc.

• Sometimes small amount of picture distortion may

appear. This is not malfunction.

• Set the resolution correctly. (Refer to “SETTING THE

DISPLAY” on page 42.)

• This unit will not transfer the video signals via HDMI

connector to TV that does not support HDCP.

This is not malfunction.

• Set the TV type correctly. (Refer to “SETTING THE

DISPLAY” on page 42.)

• Sometimes slight pause may occur.

This is not malfunction.

• Clean the disc.

• Check the connections and connect all cords securely.

• Connect the USB memory device to this unit.

• Set it to “Always Allow Access” (Refer to “SETTING

THE SYSTEM” on page 41.)

• Load a disc that supports BD-LIVE.

• Set the network settings correctly. (Refer to “SETTING

THE NETWORK” on page 45.)

VR-654(G)_ENG_100129_VR-654(G) 2010-01-29 오전 10:45 페이지 51

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sherwood VR-654BD Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info