Scooter Tiller Controls
Speed Control Dial
The speed control dial allow the scooter to set the speed between 1 (minimum)
and 10 (maximum).
Battery Level Indicator
There are two types of battery level indicators available on the models in this
manual please refer to the indicator like the model you have.
Dial Gauge
If your scooter has a battery indicator dial gauge fitted and when fully charged
the red pointer will indicate in the green section ³)´.
As the charge in the scooter batteries diminishes the battery indicator gauge
pointer will move further down the green section.
When the pointer reaches the Yellow section of the gauge the scooter batteries
will need a full charge as soon as possible. If the battery indicator gauge reaches
the red section of the dial the scooter needs urgent charging.
Led Gauge
If your scooter has a LED battery gauge fitted it has 8 LED light bars which
indicate the amount of charge remaining in the batteries for the scooter. As the
charge diminishes the LED light will move to the next brightest LED light (from
left to right). When the LED light bars move to the last light and start flashing
the batteries are in critical need of charging.
Caution ± Do Not Allow the LED bars to go out completely as complete
discharge of the batteries could cause critical damage to the batteries and
scooter electrics.
Lights (where fitted )
A blue coloured button on the tiller operates the lights on the scooter.
Horn
A yellow coloured button on the tiller operates the horn.
Thumb/Finger Lever Control (Wig Wag)
The thumb/finger lever control known as the Wig Wag controls the forward and
reverse movement of the scooter. There is a sticker on the tiller to indicate the
direction that scooter will travel when the Wig Wag is depressed or pulled. The
amount of pressure applied to each lever will determine the speed the scooter
will travel. Release the lever and the scooter will slowly come to a stop and the
electromagnetic brake will be applied.
