Bedienungsanleitung Siemens AL185 (Seite 13 von 16) (Englisch)

68474

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

AL180/AL185/AL280/AL285 / MEA EN / A31008-M2003-R101-1-UZ19 / main.fm / 31.10.2008

Specifications

Recommended batteries

Technology: Nickel-metal-hydride (NiMH)

Size: AAA (Micro, HR03)

Voltage: 1.2 V

Capacity: 400–800 mAh

We recommend the following types of battery:

◆ GP 550/700 mAh

◆ Yuasa Phone 700/800 mAh

◆ Peacebay 550/650 mAh

(Valid at the time of going to press)

The handset is supplied with recommended batter-

ies.

Base station power consumption

General specifications

Questions and answers

If you have any queries about the use of your tele-

phone, visit our website at

www.gigaset.com/customercare

for 24-hour support. The table below contains a list

of common problems and possible solutions.

Authorisation

This device is intended for connection to analogue

networks outside the EEA (with the exception of

Switzerland) depending on national type approval.

Country-specific requirements have been taken

to consideration.

We, Gigaset Communications GmbH, declare that

is device meets the essential requirements and

other relevant regulations laid down in Directive

1999/5/CE.

A copy of the 1999/5/EC Declaration of Conformity

is a

vailable at this Internet address:

www.gigaset.com/docs.

In standby mode

– Handset in base station

– Handset outside base station

approx. 1.3 W

During a call approx. 1.5 W

DECT standard is supported

GAP standard is supported

Range up to 300 m outdoors

up to 50 m indoors

Base station power supply 230 V ~/50 Hz

Environmental conditions

in operation

+5 °C to +45 °C, 20% to

75% elative humidity

Problem Cause Solution

Nothing

appears in

the display.

The handset is not

switched on.

The batteries are

at.

Press the end call

a for approx.

5 seconds or place

the handset in the

base station.

Charge or replace the

batt

eries.

No wireless

nnection

to the base

ation,

Base flashes

in th

e display.

The handset is

outsid

e the range

of the base sta-

tion.

The handset is not

egistered.

The base station is

ot turned on.

Move the handset

closer t

o the base

station.

¢ p. 10.

Check the mains con-

nector on the base

ation

¢ p. 3.

You cannot

hear a ringer/

dialling tone

from the fixed

line network.

The phone cord

supp

lied has not

been used or has

been replaced by

a new cord with

the wrong jack

connections.

Please always use the

one cord supplied

or ensure that the

pin connections are

corr

ect when purchas-

ing from a retailer:

3-4 assignment of

elephone leads/

EURO CTR37.

Error tone

sounds af

ter

system PIN

ompt.

PIN forgotten.

The system PIN

ou have entered

is incorrect.

Reset the system PIN

to the default 0000

¢ p. 11.

All handsets are

de-registered. All

ttings are reset.

All lists are deleted.

Problem Cause Solution

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens AL185 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens AL185

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info