Bedienungsanleitung Siemens AL280 (Seite 11 von 23) (Englisch)

64999

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

AL180-AL185_AL280-AL285 / IM en / A31008-M2003-R101-2-UZ19 / main.fm / 12.11.2010

Assigning key 1 for fast access to the

answer machine (network mailbox)

Simply press and hold key 1 on the handset and you

will be connected directly to the answer machine

(network mailbox).

See Menu tree ¢ page 22.

Remote operation when on the move

You can check and activate your answer machine

from any other telephone (hotel, pay phone etc.).

Preconditions:

u You have set a system PIN other than 0000

¢ page 23.

u The phone you are using for remote operation has

ouch tone dialling (DTMF), i.e. you hear different

tones when you press the keys.

Calling the answer machine and playing back

messages

(Dial your own number) ¤ while listening to your

announcement: press the 9



key and enter the system

The following keys are used for operation:

Activating the answer machine

(Enter your own number and allow the phone to ring

until you hear the message: "Please enter PIN") ¤ ~

enter system PIN

Your answer machine is activated. It tells you how

much memory time is left. The messages are now

played back. The answer machine cannot be deacti-

vated remotely.

Locating a handset

("paging")

You can locate your handset using the base station.

u Briefly p

ress the registration/paging key on the

base station (¢ page 1).

u All handsets will ring simultaneously ("paging"),

en if the ringer tones are deactivated.

End paging: bri

efly press the register/paging key on

the base station (¢ page 1) or the talk key

c on a

handset.

Registering handsets

You can register up to four handsets on your base sta-

tion (Gigaset AL18H/AL28H) recommended).

For automatic registration of handsets to

Gigase

t AL180/AL185/AL280/AL285, see ¢ page 6.

Manual registration of handsets to

Gigaset AL180/AL185/AL280/AL285

1. On the handset: MENU ¤ Settings ¤ OK ¤ Handset

¤ OK ¤ Register HS ¤ Enter the system PIN of the base

station (default is 0000) ¤ OK.

Registering flashes in the display.

2. On the base station: within 60 sec. of entering the

system PIN, press and hold the registration/paging

key (¢ page 1) (min. 3 sec.).

Registration takes approx. 1 minute.

De-registering handsets

Handsets can only be de-registered by resetting the

base station to its default settings. This will also reset

every other setting ¢ page 12.

If you have on

ly registered handsets for other GAP-

compatible devices, these can only be de-registered

with a hardware reset ¢ page 12.

Using several handsets

Making internal calls

Internal calls are free calls to other handsets that are

registered to the same base station.

To make a call to other handsets, press

INT ¤ ~ (1...4, enter internal number of the hand-

set) ¤

OK, the handset is called or

INT ¤ star key P ¤ OK, all handsets are called.

When a participant answers you can speak to them.

o end the call, press

Go to the start of the current message.

Press twice to go back to the previous mes-

sage.

Stop playback. Press again to resume.

Skip to next message.

Delete current message.

Please note:

Each addi

tional handset must be registered on the

base station in order for it to work properly!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens AL280 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens AL280

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info