Bedienungsanleitung Siemens BE634RGS1 (Seite 14 von 28) (Englisch)

565850

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

en Timer

OTimer

Timer

You can use the timer as a kitchen timer. The timer runs

alongside other settings. You can set it at any time,

even if the device is switched off. It has its own audible

signal so that you can tell whether it is the timer or a

cooking time which has elapsed.

Setting the timer

The maximum setting is 24 hours.

The higher the value, the longer the time intervals.

1. Press the 0 button.

The timer is displayed.

2. Use the rotary selector to set the timer duration.

3. Press the 0 button to start.

Note: The timer will also start automatically after a

few seconds.

The timer duration counts down. The display switches

back after a short time. A timer symbol and the elapsed

time are shown in the status bar.

An audible signal sounds once the timer duration has

come to an end. Use the 0 button to cancel the audible

signal early.

Notes

■ The timer remains visible in the display if the

appliance is switched off.

■ If an operating mode is running, touch the 0 button

to display the timer. The timer duration is displayed

for a few seconds and can be altered.

Changing the timer

Touch the 0 button to change the timer duration. The

timer duration is displayed – use the rotary selector to

change it.

Cancelling the timer

If you want to cancel the timer, reset the duration on the

timer to zero. Once the change has been applied, the

symbol is no longer lit up.

PProgrammes

Programmes

You can prepare food really easily using the various

programmes. You select a programme and enter the

weight of your food. The program then applies the most

suitable settings.

Setting a programme

Example: "Defrost bread" programme, weight 250 g.

1. Press the on/off button.

The appliance is ready to use.

2. Press the menu button.

The operating modes are shown.

3. Use the rotary selector to select "Programmes".

4. Touch the ¿ arrow.

The first programme appears in the display.

5. Use the rotary selector to set the required

programme.

The required programme is selected. The default

value for the weight appears in the display.

6. Touch the ¿ arrow.

The weight can be set.

7. Use the rotary selector to set the required weight.

8. Touch the ¿ arrow.

The preparation instruction is displayed.

9. Press the start/stop button to start.

The appliance starts the operation. The time counts

down on the display.

Notes

■ The cooking time is calculated by the programmes.

■ For some dishes, the display provides instructions

for turning or stirring during preparation. Follow the

information provided. Opening the appliance door

pauses the operation. After closing the appliance

door, restart the operation. If you do not turn or stir

the dish, the programme runs as normal until it

reaches the end.

PQFO TUBSUTUPQ





7LPHUPLQV



PGG

NFOV



J'HIURVWEUHDG

PLQV

PQFO TUBSUTUPQ





J'HIURVWEUHDG

PLQV

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens BE634RGS1 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens BE634RGS1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info