Bedienungsanleitung Siemens C455 (Seite 27 von 41) (Englisch)

67282

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

Using the network mailbox

Gigaset C 455 / IM engl / A31008-M1707-R101-1-UZ19 / T-NetBox_SAG-registration.fm / 27.7.07

Using the network mailbox

The network mailbox is your network provider's

answering machine. You cannot use the net-

work mailbox unless you have applied to your

network provider.

Configuring the network mailbox

for fast access

With fast access, you can direct dial either the

network mailbox or the integrated answering

machine (Gigaset C455).

The integrated answering machine is precon-

figured for fast access. You can configure the

network mailbox instead. Ask your network

provider about the network mailbox.

Configuring the network mailbox for fast

access and entering the network mailbox

number

§Menu§ ¢ Voice Mail ¢ Set Key 1

Network Mailbox

Select and press

§OK§ (‰ =on).

~ Enter the network mailbox

number and press

§OK§.

The entry is stored.

a Press and hold (idle status).

This setting is now valid for all registered hand-

sets.

Calling the network mailbox

Press and hold. This connects you

directly to the network mailbox.

d Press handsfree key d if required.

You hear the network mailbox

announcement.

Viewing a message from the

network mailbox

When a message arrives for you, you get a call

from the network mailbox. If you have

requested Calling Line Identification, the dis-

play shows the network mailbox number. If you

accept the call, the new messages are played

back. If you do not accept the call, the network

mailbox number will be stored in the list of

missed calls and the message key flashes

(page 14).

Using several handsets

Registering handsets

You can register up to four handsets on your

base station.

Automatic registration Gigaset C45 to Gigaset

C455, see page 6.

Manual registration Gigaset C45 to

Gigaset C455

You must activate manual registration of the

handset at both the handset and the base sta-

tion.

After it has registered, the handset returns to

idle status. If several handsets are registered to

the base, the internal number is shown in the

display after registration, e.g. INT 2.

The registration process is cancelled after

60 seconds. If the handset has not registered

within this time, repeat the process.

On the handset

Menu§ ¢Settings ¢ Handset ¢ Register

Handset

~ Enter the system PIN of the base

station (the default is 0000) and

press

§OK§. Base is flashing in the

display.

On the base station

Press and hold the registration/

paging key on the base station

(page 2) (min. 1 sec.).

Registering other handsets

You can register other Gigaset handsets and

handsets for other devices with GAP functional-

ity as follows.

On the handset

¤ Start to register the handset as described in

its user guide.

On the base station

Press and hold the registration/

paging key on the base station

(page 2) (min. 1 sec.).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens C455 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens C455

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info