Bedienungsanleitung Siemens CM656GBS1 (Seite 20 von 56) (Englisch)

622878

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

en Cleaning agent

Tip: Highly recommended cleaning and care products

can be purchased through the after-sales service.

Observe the respective manufacturer's instructions.

:Warning – Risk of burns!

The appliance becomes very hot. Never touch the

interior surfaces of the cooking compartment or the

heating elements. Always allow the appliance to cool

down. Keep children at a safe distance.

--------

Notes

■ Slight differences in colour on the front of the

appliance are caused by the use of different

materials, such as glass, plastic and metal.

■ Shadows on the door panels, which look like

streaks, are caused by reflections made by the

interior lighting.

■ Enamel is baked on at very high temperatures.This

can cause some slight colour variation. This is

normal and does not affect operation.

The edges of thin trays cannot be completely

enamelled. As a result, these edges can be rough.

This does not impair the anti-corrosion protection.

Surfaces in the cooking compartment

The back wall, ceiling and side parts in the cooking

compartment are self-cleaning. You can tell this from

the rough surface.

The cooking compartment floor is enamelled and has

smooth surfaces.

Cleaning enamelled surfaces

Clean the smooth enamelled surfaces with a dish cloth

and hot soapy water or a vinegar solution. Then dry with

a soft cloth.

Soften baked-on food residues with a damp cloth and

soapy water. Use stainless steel wire wool or oven

cleaner to remove stubborn dirt.

Leave the cooking compartment open to dry after

cleaning.

Note: Food residues can cause white deposits to form.

These are harmless and do not affect how the

appliance works. You can remove these residues using

lemon juice if required.

Cleaning self-cleaning surfaces

The self-cleaning surfaces are coated with a porous,

matte ceramic layer. This coating absorbs and dispels

Area Cleaning

Appliance exterior

Stainless steel

front

Hot soapy water:

Clean with a dish cloth and then dry with a soft

cloth.

Remove flecks of limescale, grease, starch and

albumin (e.g. egg white) immediately. Corrosion

can form under such flecks.

Special stainless steel cleaning products suitable

for hot surfaces are available from our after-sales

service or from specialist retailers. Apply a very

thin layer of the cleaning product with a soft cloth.

Plastic Hot soapy water:

Clean with a dish cloth and then dry with a soft

cloth.

Do not use glass cleaner or a glass scraper.

Painted surfaces Hot soapy water:

Clean with a dish cloth and then dry with a soft

cloth.

Control panel Hot soapy water:

Clean with a dish cloth and then dry with a soft

cloth.

Do not use glass cleaner or a glass scraper.

Door panels Hot soapy water:

Clean with a dish cloth and then dry with a soft

cloth.

Do not use a glass scraper or a stainless steel

scouring pad.

Door handle Hot soapy water:

Clean with a dish cloth and then dry with a soft

cloth.

If descaler comes into contact with the door han-

dle, wipe it off immediately. Otherwise, any stains

will not be able to be removed.

Appliance interior

Enamel surfaces

and self-cleaning

surfaces

Observe the instructions for the surfaces of the

cooking compartment that follow the table.

Glass cover for

the interior light-

ing

Hot soapy water:

Clean with a dish cloth and then dry with a soft

cloth.

If the cooking compartment is heavily soiled, use

oven cleaner.

Door seal

Do not remove.

Hot soapy water:

Clean with a dish cloth.

Do not scour.

Stainless steel

door cover

Stainless steel cleaner:

Observe the manufacturer's instructions.

Do not use stainless steel care products.

Remove the door cover for cleaning.

Stainless steel

interior door

frame

Stainless steel cleaner:

Observe the manufacturer's instructions.

This can be used to remove discolouration.

Do not use stainless steel care products.

Rails Hot soapy water:

Soak and clean with a dish cloth or brush.

Pull-out system Hot soapy water:

Clean with a dish cloth or a brush.

Do not remove the lubricant while the pull-out rails

are pulled out – it is best to clean them when they

are pushed in. Do not clean in the dishwasher.

Accessories Hot soapy water:

Soak and clean with a dish cloth or brush.

If there are heavy deposits of dirt, use a stainless

steel scouring pad.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens CM656GBS1 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens CM656GBS1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info