Bedienungsanleitung Siemens CM656NBS1 (Seite 19 von 56) (Englisch)

622879

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Cleaning function en

.Cleaning function

Cleaning function

The self-cleaning surfaces in the cooking compartment

are cleaned when the operating mode is set to

"Cleaning function".

The self-cleaning surfaces (back panel, ceiling panel

and side panels) are coated with a porous, matt

ceramic material. This coating absorbs and breaks

down splashes from baking, roasting and grilling while

the oven is in operation. If the surfaces no longer clean

themselves adequately and dark patches appear, the

surfaces can be cleaned by the cleaning function.

Note: The appliance records the number of times it is

used.The appliance indicates when it has reached a

point in time after which cleaning is recommended. The

recommendation is displayed until the cleaning function

has finished.

If you do not act on this recommendation, the self-

cleaning surfaces may become damaged.

If your appliance is already prematurely very dirty or if

you notice dark patches on the back panel, do not wait

until your appliance recommends cleaning to do so.

This is because the more often the appliance is

cleaned, the longer the self-cleaning surfaces will retain

their cleaning capability. You can clean your appliance

at any time as required using the cleaning function.

Prior to initiating the cleaning function

Remove shelves, rails, accessories and ovenware from

the cooking compartment.

Cleaning the cooking compartment floor and the

inside of the appliance door

Remove the worst dirt from the cooking compartment

floor, the inside of the appliance door and the interior

lighting. Otherwise, patches will appear that can no

longer be removed.

Caution!

Do not use oven cleaner on the self-cleaning surfaces.

This will damage the surfaces. If oven cleaner does

come into contact with these surfaces, dab it off

immediately with water and a sponge cloth. Please to

not rub or use any abrasive cleaning materials.

Setting the cleaning function

Cleaning lasts 60 minutes.

The duration cannot be changed.

1. Press the menu button.

The operating modes menu opens.

2. Select the "Cleaning function" operating mode.

If you touch the "Next" field, information on the

cleaning operation is displayed.

3. Press the "Start/stop" button to start the cleaning

operation.

You can see the duration counting down in the

status bar.

Keep the kitchen ventilated while cleaning is in

progress.

Once the cleaning has finished

An audible signal sounds. The oven stops heating.

“Finished” appears in the status bar. Use the 0 button

to switch off the audible signal. “Appliance cooling

down” appears in the status bar.

Cancelling cleaning

Press the On/Off button. All settings are deleted. You

can implement new settings.

Caution!

The cleaning recommendation is not reset. The

recommendation to run the cleaning function appears

on the display.

You can set the cleaning to run overnight

In the section "Time settings", you can find out how to

delay the end time. This allows you to use the oven at

any time throughout the day. ~ "Time-setting options"

on page 14

Once the cleaning function has ended

Once the cooking compartment has cooled down, wipe

down the cooking compartment with a damp cloth if

necessary.

Note: During operation and while the cleaning function

is active, reddish patches may form on the surfaces.

This is not rust, but food residues. These patches are

not hazardous to your health and do not limit the

cleaning capacity of the self-cleaning surfaces.

DCleaning agent

Cleaning agent

With good care and cleaning, your appliance will retain

its appearance and remain fully functioning for a long

time to come. We will explain here how you should

correctly care for and clean your appliance.

Suitable cleaning agents

To ensure that the different surfaces are not damaged

by using the wrong cleaning agent, observe the

information in the table. Depending on the appliance

model, not all of the areas listed may be on/in your

appliance.

Caution!

Risk of surface damage

Do not use:

■ Harsh or abrasive cleaning agents,

■ Cleaning agents with a high alcohol content,

■ Hard scouring pads or cleaning sponges,

■ High-pressure cleaners or steam cleaners,

■ Special cleaners for cleaning the appliance while it is

hot.

Wash new sponge cloths thoroughly before use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens CM656NBS1 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens CM656NBS1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info