Bedienungsanleitung Siemens CM656NBS1 (Seite 24 von 56) (Englisch)

622879

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

en Trouble shooting

3Trouble shooting

Trouble shooting

If a fault occurs, there is often a simple explanation.

Before calling the after-sales service, please refer to the

fault table and attempt to correct the fault yourself.

Note: If a dish does not turn out as well as you had

hoped, refer to the table section at the end of the

instruction manual, where you will find plenty of tips and

information. ~ "Tested for you in our cooking studio"

on page 27

:Warning – Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be

carried out and damaged power cables replaced by

one of our trained after-sales technicians. If the

appliance is defective, unplug the appliance from the

mains or switch off the circuit breaker in the fuse box.

Contact the after-sales service.

Fault table

If an error message beginning with 'E' is shown, e.g.

E0111, switch the appliance off and then on again. If

this message appears again, contact the after-sales

service.

--------

Maximum operating time exceeded

Your appliance automatically ends the operation if no

duration has been set and the setting has not been

changed for a long time.

The point at which this occurs depends on the

temperature or grill setting that has been set.

A message appears on the display on the appliance to

say that the operation is being ended automatically. The

operation is then cancelled.

To use the appliance again, first switch it off. To switch

the appliance back on again set the required operation.

Tip: Set a cooking time so that the appliance does not

switch off when you do not want it to, e.g. with an

extremely long preparation time. The appliance heats

up until the set cooking time has elapsed.

Cooking compartment bulbs

To light the interior of your cooking compartment, your

appliance has one or more long-life LED bulbs.

However, if ever an LED bulb or the bulb's glass cover

is defective, call the after-sales service. The lamp cover

must not be removed.

Fault Possible cause Information/remedial action

The appliance does not work The fuse is faulty Check in the fuse box to make sure that the fuse for

the appliance is in working order

Power cut Check whether other kitchen appliances are working

Although the appliance is switched

on, it cannot be operated; the 1

symbol is shown in the display

The child lock is activated

Press and hold the 1 button until the 1 symbol

goes out

The cooking compartment does not

heat and "Demo mode on" is shown in

the display

The appliance is in demo mode Switch off the fuse in the fuse box and switch it back

on again after approx. 10 seconds. Switch on the

appliance and select "Demo mode off" in the settings.

The interior lighting has failed The LED bulb is defective Call the after-sales service

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens CM656NBS1 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens CM656NBS1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info