Bedienungsanleitung Siemens CM676G0S6 (Seite 24 von 60) (Englisch)

607987

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

en Cleaning function

■ Enamel is baked on at very high temperatures.This

can cause some slight colour variation. This is

normal and does not affect operation.

The edges of thin trays cannot be completely

enamelled. As a result, these edges can be rough.

This does not impair the anti-corrosion protection.

Keeping the appliance clean

Always keep the appliance clean and remove dirt

immediately so that stubborn deposits of dirt do not

build up.

Tips

■ Clean the cooking compartment after each use. This

will ensure that dirt cannot be baked on.

■ Always remove flecks of limescale, grease, starch

and albumin (e.g. egg white) immediately.

■ Use the universal pan for baking very moist cakes.

■ Use suitable ovenware for roasting, e.g. a roasting

dish.

.Cleaning function

Cleaning function

You can use the "Self-cleaning" operating mode to

clean the cooking compartment effortlessly. The

cooking compartment is heated up to a very high

temperature. Residues from roasting, grilling and

baking will burn.

You can choose from three cleaning settings.

The dirtier the cooking compartment and the longer the

dirt has been there, the higher the cleaning setting

should be. A cleaning cycle requires only approx. 2.5 –

4.7 kilowatt hours.

Note: For your safety, the cooking compartment door

locks automatically. It cannot be opened again until the

H symbol for the locking mechanism goes out in the

status bar. The interior lighting remains off during

cleaning.

:Warning

Risk of burns!

■ The cooking compartment becomes extremely hot

during the cleaning function. Never open the

appliance door. Allow the appliance to cool down.

Keep children away from the appliance.

Risk of burns!

■ ; The appliance will become very hot on the

outside during the cleaning function. Never touch the

appliance door. Allow the appliance to cool down.

Keep children away from the appliance.

Prior to initiating the cleaning function

While cleaning is in progress, you can clean an

accessory at the same time, e.g. the universal pan or

the baking tray. Before cleaning is started, remove the

worst dirt. Slide the accessory in at level 2.

Clean the inside of the appliance door and along the

surface edges of the cooking compartment in the area

around the seal. Do not scrub the seal.

Notes

■ You can clean the enamelled accessory supplied at

the same time as carrying out the cleaning function.

You cannot clean any of the wire racks at the same

time. The wire racks are not suitable for cleaning

using the cleaning function; this will discolour them.

Further accessories suitable for cleaning using the

cleaning function are listed in the table for special

accessories. ~ "Accessories" on page 11

■ If the cooking compartment is very dirty, it is best to

clean it without any accessories inside. This will

achieve an optimum result.

If you would like to clean accessories at the same

time, start the cleaning function again.

:Warning

Risk of fire!

■ Loose food residues, grease and meat juices may

catch fire during the cleaning function. Before

starting the cleaning function, remove coarse dirt

from the cooking compartment and from the

accessories.

Risk of fire!

■ The appliance will become very hot on the outside

during the cleaning function. Never hang

combustible objects, e.g. tea towels, on the door

handle. Do not place anything against the front of

the appliance. Keep children away from the

appliance.

:Warning – Risk of serious damage to health!

The appliance will become very hot during the cleaning

function. The non-stick coating on baking trays and tins

is destroyed and noxious gases are released. Never

clean non-stick baking trays and baking tins using the

cleaning function. Only clean enamelled accessories

using the cleaning function.

Setting the self-cleaning function

1. Press the menu button.

The operating modes menu opens.

2. Select the "Self-cleaning" operating mode.

Cleaning setting 3 is suggested. You can start the

cleaning process immediately using the "Start/stop"

button or

3. select a different cleaning setting using the rotary

selector.

4. Press the "Start/stop" button to start the cleaning

operation.

The cooking compartment door locks shortly after

operation starts. The H symbol for the locking

mechanism appears on the right-hand side of the status

bar next to the elapsing duration.

The cooking compartment door cannot be opened until

the H symbol goes out in the status bar.

Setting Cleaning level Duration

1 Light Approx. 1 hour, 15 minutes

2 Medium Approx. 1 hour, 30 minutes

3 Intensive Approx. 2 hours

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens CM676G0S6 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens CM676G0S6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info