Bedienungsanleitung Siemens E45 (Seite 16 von 29) (Englisch)

40017

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

Using a handset as a room monitor

Gigaset E45 / English / A31008-M1751-R601-1-TJ19 / start_guide_time.fm / 01.08.2005

Opening lists with the message

key

An advisory tone sounds as soon as a new

entry appears on a list. The f key

flashes (it goes off when the key is

pressed). In idle status, the displays shows

an icon for the new message.

If you press the f key, you access the

lists which contain new messages.

Using a handset as a room

monitor

If the room monitor is activated, a previ-

ously stored destination number is called

as soon as a set noise level is reached. You

can store an internal or external number

in your handset as the destination

number.

The room monitor call to an external

number stops after approx. 90 seconds.

The room monitor call to an internal

number (handset) stops after approx. 3

minutes (depending on the base station).

While the room monitor is activated, all

keys are locked except the end call key.

The handset's speaker is muted.

When the room monitor is activated,

incoming calls to the handset are indi-

cated without a ringtone and are only

shown on the screen. The display and key-

pad are not illuminated and advisory

tones are also turned off.

If you accept an incoming call, the room

monitor mode is suspended for the dura-

tion of the call, but the function remains

activated.

If you switch off the handset, the room

monitor mode is deactivated. You must

reactivate the function after switching on

the handset again.

Activating the room monitor and

entering the number to be called

v ¢ í ¢ Room Monitor

¤ Change multiple line input:

Room M.:

Select On to activate.

Call to:

Press the display key

§Edit§ and enter des-

tination number.

External number: select number from

the directory or enter directly. Only the

last 4 digits are displayed.

Internal number: delete any stored

external number.

§INT§ s (select hand-

set or Call All , if all registered handsets

are to be called)

§OK§.

Store number with

§Save Entry§ §OK§.

Level:

Set noise level sensitivity (Low or High).

¤ Save changes (page 21).

The function is now activated. With v,

you can move directly to settings.

Caution!

– You should always check the operation

of the room monitor before use. For

example, test its sensitivity. Check the

connection if you are diverting the room

monitor to an outside number.

– When the function is switched on, the

handset's operating time is severely

reduced. If necessary, place the handset in

the charging cradle. This ensures that the

battery pack does not run down.

– Ideally the handset should be positioned 1

to 2 metres away from the baby. The micro-

phone must be directed towards the baby.

– The connection to which the room monitor

is diverted must not be blocked by an acti-

vated answering machine.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens E45 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens E45

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info