Bedienungsanleitung Siemens ED711FQ15E (Seite 25 von 36) (Englisch)

710617

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

en Cleaning

To ensure that the different surfaces are not damaged

by using the wrong cleaning product, follow the

instructions in the table.

Components to clean

Hob surround (only on appliances with hob

surrounds)

To prevent damage to the hob surround, observe the

following instructions:

■Only use warm soapy water

■Wash new dish cloths thoroughly before use.

■Do not use harsh or abrasive cleaning agents.

■Do not use a glass scraper or sharp objects.

■Do not use any hard, scratchy sponges, brushes or

scouring pads.

Hob

Clean the hob each time you use it. This will prevent

food remnants from becoming burned on. Do not clean

the hob until the residual heat indicator has gone out.

Remove boiled-over liquids immediately and do not

allow any food remnants to dry on.

Leave the metal grease filter in the appliance while you

clean the hob. Dirt and food remnants collect in the

metal grease filter and not in the appliance interior. You

can clean the metal grease filter in the dishwasher.

Clean the hob with a damp dish cloth and dry it with a

cloth to prevent limescale build-up.

Stubborn dirt is best removed with a glass scraper or

glass ceramic cleaner (available from retailers). Follow

the manufacturer's instructions.

Area Cleaning products

Glass ceramic Glass cleaner for stains due to limescale and

water marks:

Clean the cooktop as soon as it has cooled

down. You can use a cleaning product that is

suitable for glass-ceramic hobs or glass

cleaner.

Glass scraper for stains caused by sugar, rice

starch or plastic:

Clean immediately. Caution: Risk of burns.

Then clean with a damp dish cloth and dry

with a cloth.

Note: Do not use cleaning products designed

for dishwashers.

Stainless steel Hot soapy water:

Clean with a dish cloth and dry with a soft

cloth.

Use a minimal amount of water when cleaning

to prevent water from penetrating the appli-

ance.

Leave dried-on remains to soak in a small

amount of soapy water; do not scour.

Clean stainless steel surfaces in the direction

of the finish only.

Special stainless steel cleaning products are

available from our after-sales service, through

our online shop or from specialist retailers.

Apply a very thin layer of the cleaning product

with a soft cloth.

Note: Do not use a glass scraper to clean the

cooktop surround.

Plastic Hot soapy water:

Clean with a soft cloth or in the dishwasher.

Controls Hot soapy water or an appropriate glass

cleaner:

Clean using a damp dish cloth and then dry

with a soft cloth.

No. Designation

1 Metal grease filter

2 Activated charcoal filter for air recirculation or acoustics fil-

ter for air extraction*

3 Hob

4 Control panel

5 Overflow container

*Depending on the appliance specifications







Cleaning en

You can obtain a suitable glass scraper (article no.

00087670) from our after-sales service or through our

online shop.

Using a special sponge for cleaning glass-ceramic

hobs achieves great cleaning results.

Ventilation system

The filter must be regularly cleaned or replaced in order

to guarantee efficient filtration of odours and grease.

Metal grease filter

The metal grease filter must be cleaned regularly.

:Warning – Risk of fire!

Fatty deposits in the grease filter may catch fire.

Regularly clean the grease filter. Never operate the

appliance without a grease filter.

Activated charcoal filters

The activated charcoal filter should be replaced

regularly. The saturation indicator on your appliance will

tell you how frequently this needs to be done.

If you only use your appliance in air extraction mode,

change the acoustics filter as soon as it is dirty.

Saturation display

When the activated charcoal filters are saturated, an

audible signal sounds after the appliance is switched

off.

” lights up on the display.

Do not wait any longer to replace the activated charcoal

filters.

If you have replaced the activated charcoal filters, you

should reset the saturation indicator so that the ”

display goes out.

After the appliance has been switched off, ” lights up.

Press and hold the symbol for the ventilation system

until an audible signal sounds.

The activated charcoal filter saturation indicator has

now been reset.

Changing the activated charcoal filter (only in

circulating-air mode)

Activated charcoal filters trap the odour-causing

compounds in cooking smells. They are only used for

circulating-air mode.

Notes

■The activated charcoal filters and acoustics filters

are included with the appliance. When the activated

charcoal filters or acoustics filters need to be

replaced, they can be obtained from specialist

retailers, from our after-sales service or from our

online shop.

■The activated charcoal filters and acoustics filters

cannot be cleaned or reactivated.

■Only use genuine replacement filters. This will

ensure that the appliance performs optimally.

1. Remove the metal grease filter.

Notes

– Grease may accumulate in the bottom of the

container. Hold the metal grease filter level to

prevent grease from dripping out.

– Make sure that the metal grease filter does not

fall and damage the cooktop.

2. Remove the four activated charcoal filters or

acoustics filters and dispose of them properly.

3. Insert two of the activated charcoal filters or

acoustics filters into the left and right of the

appliance and slide them forwards.

4. Insert the other activated charcoal filters or acoustics

filters into the left and right of the appliance.

5. Insert the metal grease filter.











Siemens ED711FQ15E Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens ED711FQ15E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info