Bedienungsanleitung Siemens ED811FQ15E (Seite 19 von 36) (Englisch)

791009

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

en PowerBoost function

Once the time has elapsed

The hotplate switches off. A warning signal sounds. The

time program function lights up ‹‹ for 10 seconds in

the display.

When the 0 symbol is pressed, the indications turn off

and the beeping stops.

Notes

■If a cooking time was programmed for several

hotplates, the time information for the selected

hotplate is shown in the timer display.

■You can set a cooking time of up to 99 minutes.

The kitchen timer

You can use the kitchen timer to set a time of up to 99

minutes.

This functions independently from the hotplates and

from other settings. This function does not automatically

switch off a hotplate.

Programming

1. Press the 0 symbol several times until the W

indicator lights up. ‹‹ lights up in the time program

function display.

2. Select the desired time in the programming panel.

The timer starts to count down after a few seconds.

Changing or cancelling the time

Press the 0 symbol several times until the W indicator

lights up. Change the time with the programming zone,

or set to ‹‹.

Once the time has elapsed

A warning signal sounds. In the time program function

display ‹‹ is shown, and the W indicator lights up.

After 10 seconds the indicators turn off.

When the 0 symbol is pressed, the indicators turn off

and the beeping stops.

vPowerBoost function

Power Boost f unct i on

The PowerBoost function enables you to heat up large

quantities of water faster than when using heat setting

Š.

This function can always be activated for a hotplate,

provided the other hotplate in the same group is not in

use (see illustration). Otherwise, › and Š will flash in

the display for the selected hotplate; the Š heat setting

will then be set automatically without activating the

function.

Note: In the combi zone, the PowerBoost function can

only be activated if the two hotplates are used

independently of each other.

Activating

1. Select a hotplate.

2. Select the Š heat setting and then touch the &

symbol. The › indicator lights up.

The function was activated.

Deactivation

1. Select the hotplate.

2. Touch the & symbol.

The › display goes out and the hotplate switches

back to the Š heat setting.

The function is deactivated.

Note: In certain circumstances, the PowerBoost

function can switch itself off automatically in order to

protect the electronic elements inside the hob.





Childproof lock en

AChildproof lock

Chi l dpr oof l oc k

You can use the childproof lock to prevent children

from switching on the hob.

Activating and deactivating the childproof

lock

The hob should be turned off.

To activate: press the symbol ‚ for approximately 4

seconds. The indicator next to the symbol ‚ lights up

for 10 seconds. The hob is locked.

To deactivate: press the symbol ‚ for approximately

4 seconds. The lock is now deactivated.

Childproof lock

With this function, the childproof lock automatically

activates when a hob is switched off.

Switching on and off

You can find out how to switch the automatic childproof

lock on in the ~ "Basic settings" section

kWipe protection

Wi pe pr ot ec t i on

If you wipe over the control panel while the hob is

switched on, settings may be altered. To avoid doing

this, you can use the hob's "Lock control panel for

cleaning" function.

To activate: Touch the Ñ symbol. An audible signal

sounds. The control panel is locked for 35 seconds.

You can now wipe over the surface of the control panel

without altering any settings.

To deactivate: The control panel will be unlocked once

35 seconds have elapsed. To release the function early,

touch the Ñ symbol.

Notes

■An audible signal sounds 30 seconds after

activation. This indicates that the function is about to

finish.

■The cleaning lock does not lock the main switch. The

hob can be switched off at any time.

bAutomatic safety cut-out

Aut omat i c s af et y c ut - out

If a hotplate operates for an extended period and no

settings are changed, the automatic safety shut-off is

activated.

The hotplate stops heating. ”, ‰ and the residual heat

indicator œ or • flash alternately in the hotplate display.

When you touch any symbol, the display switches off.

The hotplate can now be set again.

The point at which the safety shut-off becomes active

depends on which heat setting has been set (after 1 to

10 hours).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens ED811FQ15E Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens ED811FQ15E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info