Bedienungsanleitung Siemens ED811FQ15E (Seite 27 von 36) (Englisch)

791009

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

en Cleaning

Resetting the saturation displays

If you have replaced the activated charcoal filters, you

should reset the saturation indicator so that the ”

display goes out.

After the appliance has been switched off, ” lights up.

Press and hold the symbol for the ventilation system

until an audible signal sounds.

The activated charcoal filter saturation indicator has

now been reset.

Removing metal grease filter

The metal grease filters filter the grease out of kitchen

steam. To keep it in good working order, the metal

grease filter must be cleaned regularly.

Also clean the inside of the hob extractor system

regularly. You can use a special degreaser to remove

stubborn dirt.

1. Remove the metal grease filter.

Notes

– Grease may accumulate in the bottom of the

container. Hold the metal grease filter level to

prevent grease from dripping out.

– Make sure that the metal grease filter does not

fall and damage the cooktop.

2. Clean the metal grease filters in the dishwasher or

with hot soapy water.~ "Cleaning the metal grease

filter" on page 26

3. If required, after removing the metal grease filter,

remove the activated charcoal filter and clean the

appliance from the inside.

4. After cleaning, reinsert the dried metal grease filter.

Cleaning the metal grease filter

Notes

■Do not use aggressive, acidic or alkaline cleaning

products.

■The metal grease filter can be cleaned in the

dishwasher or by hand.

By hand:

Note: You can use a special degreaser to remove

stubborn dirt. It can be ordered via the online shop.

■Remove the metal grease filter.

■Soak the metal grease filter in hot soapy water.

■Clean the metal grease filter with a brush and then

rinse it thoroughly.

■Leave the metal grease filter to drain.

In the dishwasher:

■Do not clean the metal grease filter together with

cookware if heavily soiled.

■Place the metal grease filter in the dishwasher,

leaving plenty of space around it. Do not trap the

metal grease filter.

■For best results, place the metal grease filter in the

dishwasher filter side down.

Cleaning the overflow container

1. Unscrew the overflow container with both hands.

Note: Hold the overflow container level to prevent

liquid from leaking out.

2. Empty the overflow container and rinse it out.

3. If necessary, unscrew the screw and clean the

overflow container without the screw in the

dishwasher.

4. Clean the overflow container before screwing it back

into place.

Notes

■Ensure that the supply to the overflow container is

not blocked. Once it has cooled down, remove any

objects that have entered the appliance. To do this,

remove the metal grease filter.

■If liquid gets into the appliance from above, this is

collected in the overflow container. Unscrew the

overflow container and empty it.

1I 2

Frequently Asked Questions (FAQ) en

{Frequently Asked

Questions (FAQ)

Fr equent l y As k e d Quest i ons ( F AQ)

Using the appliance

Why can I not switch on the hob and why is the childproof lock symbol lit?

The childproof lock is now active.

You can find information about this function in the section ~ "Childproof lock".

Why are the illuminated displays flashing and why is a signal sounding?

Remove any liquid or remnants of food from the control panel. Remove any objects from the control panel.

You can find out how to deactivate the audible signal in section ~ "Basic settings".

The ventilation system does not switch on even though the automatic start is set.

Switch on the ventilation system manually or check the configuration of the automatic mode. You can find additional information about this

in section ~ "Basic settings".

The ventilation system remains on even though the cooking zones have been switched off.

Manually switch off the ventilation system.

You can find additional information about this setting in section ~ "Operating the appliance".

The air intake is too weak.

Ensure that the metal grease filter is clean.

You can find additional information about changing the filter and cleaning in section ~ "Cleaning".

Noises

Why I can hear noises while I'm cooking?

Noises may be generated while using the hob depending on the base material of the cookware. These noises are a normal part of induc-

tion technology. They do not indicate a defect.

Possible noises:

A low humming noise like the one a transformer makes:

Occurs when cooking at a high heat setting. The noise disappears or becomes quieter when the heat setting is reduced.

Low whistling noise:

Occurs when the cookware is empty. This noise disappears when water or food is added to the cookware.

Crackling:

Occurs when using cookware made from different layers of material or when using cookware of different sizes and different materials at

the same time. The loudness of the noise can vary depending on the quantity of food being cooked or the cooking method.

High-pitched whistling noises:

Can occur when two hotplates are used at the highest heat setting at the same time. The whistling noises disappear or become quieter

when the heat setting is reduced.

Fan noise:

The hob is equipped with a fan that switches on automatically at high temperatures. The fan may continue to run even after you have

switched off the hob if the temperature detected is still too high.

Siemens ED811FQ15E Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens ED811FQ15E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info