Bedienungsanleitung Siemens ED845FWB5E (Seite 15 von 28) (Englisch)

790969

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

en Time-setting options

Activation

1. Select one of the two cooking zones assigned to the

Move function.

2. Touch the ÿ symbol. The ÿ indicators light up.

The power levels light up in the displays for the two

cooking zones.

The function has now been activated.

Notes

■The display for the hotplate with the cookware lights

up more brightly.

■The ¬ indicator lights up on the display for the

hotplate that is still selected.

Changing the heat setting

Select one of the two hotplates which are included in

the move function and change the heat setting in the

settings range.

Note: If the function is deactivated, the heat settings

return to the preset values

Deactivating

Touch the ÿ symbol.

The function has been deactivated.

Note: When one of the two hotplates is set to ‹, the

function is deactivated within approx. 10 seconds.

OTime-setting options

Ti me- s et t i ng opt i ons

Your hob has two timer functions:

■Programming the cooking time

■Kitchen timer

Programming the cooking time

The hotplate automatically switches off after the time

that is set has elapsed.

Setting procedure:

1. Select the hotplate and the required heat setting.

2. Touch the 0 symbol. x lights up on the display for

the hotplate.‹‹ lights up on the timer display.

3. Within the next 10 seconds, set the required cooking

time in the settings range.

After a few seconds, the time begins to elapse.

Notes

■The same cooking time can be set automatically for

all hotplates. The set time for each of the hotplates

counts down independently from the others.

You can find information on automatically

programming the cooking time in section ~ "Basic

settings"

■If the Combi Zone or Move function is selected for

the combined hotplate, the set time for both

hotplates is the same.

Changing or cancelling the time

Select the hotplate and then press the 0 symbol.

Change the cooking time using the programming zone

or set to ‹‹ in order to cancel the time.

Once the time has elapsed

The hotplate switches off. A warning signal sounds. The

time program function lights up ‹‹ for 10 seconds in

the display.

When the 0 symbol is pressed, the indications turn off

and the beeping stops.

Notes

■If a cooking time was programmed for several

hotplates, the time information for the selected

hotplate is shown in the timer display.

■You can set a cooking time of up to 99 minutes.

 

PowerBoost function en

The kitchen timer

You can use the kitchen timer to set a time of up to 99

minutes.

This functions independently from the hotplates and

from other settings. This function does not automatically

switch off a hotplate.

Programming

1. Press the 0 symbol several times until the W

indicator lights up. ‹‹ lights up in the time program

function display.

2. Select the desired time in the programming panel.

The timer starts to count down after a few seconds.

Changing or cancelling the time

Press the 0 symbol several times until the W indicator

lights up. Change the time with the programming zone,

or set to ‹‹.

Once the time has elapsed

A warning signal sounds. In the time program function

display ‹‹ is shown, and the W indicator lights up.

After 10 seconds the indicators turn off.

When the 0 symbol is pressed, the indicators turn off

and the beeping stops.

vPowerBoost function

Power Boost f unct i on

The PowerBoost function enables you to heat up large

quantities of water faster than when using heat setting

Š.

This function can always be activated for a hotplate,

provided the other hotplate in the same group is not in

use (see illustration). Otherwise, › and Š will flash in

the display for the selected hotplate; the Š heat setting

will then be set automatically without activating the

function.

Note: In the combi zone, the PowerBoost function can

only be activated if the two hotplates are used

independently of each other.

Activation

1. Select a hotplate.

2. Touch the & symbol.

› lights up on the display.

The function is activated.

Deactivation

1. Select the hotplate.

2. Touch the & symbol.

The › display goes out and the hotplate switches

back to the Š heat setting.

The function is deactivated.

Note: In certain circumstances, the PowerBoost

function can switch itself off automatically in order to

protect the electronic elements inside the hob.





Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens ED845FWB5E Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens ED845FWB5E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info