Bedienungsanleitung Siemens EH 375ME11E (Seite 9 von 16) (Englisch)

71956

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Powerboost function

The Powerboost function can be used to heat large amounts of

water more quickly than the power level

Š.

Usage restrictions

This function can always be activated for a hotplate, provided

the other hotplate in the same group is not in use (see

illustration). Otherwise,

› and Š flash in the heat setting display

for the selected hotplate; the

Š heat setting is then set

automatically.

To activate

1. Select the power level Š.

2. Press the programming panel located above the @› symbol.

The function has been activated.

To turn of f

Press the programming panel located above the @› symbol.

The Powerboost function has been deactivated.

Note: In certain circumstances, the Powerboost function may

turn off automatically in order to protect the electronic

components inside the hob.

Time programming function

This function may be used in two different ways:

■ to automatically switch off a hotplate.

■ as a timer.

A hotplate should switch off automatically

The hotplate switches off automatically after the time that is set

has elapsed.

Setting the cooking time

The hob must be switched on.

1. Select the hotplate and set the heat setting.

2. Touch the 0 symbol. The x indicator for the required

hotplate lights up.

‹‹ appears in the timer display. To select

a different hotplate, touch the

0 repeatedly until the x

indicator for the required hotplate lights up.

3. Within the next 10 seconds, set the required cooking time in

the control panel. The possible presets from left to right are 1,

2, 3..... up to 10 minutes.

After a few seconds, the cooking time begins to elapse.

Note: The same cooking time can be automatically

programmed for the all the hotplates. The programmed time

passes independently for each of the hotplates.

The Basic settings chapter provides information on

automatically programming the cooking time.

Automatic programming

If the previous setting from 1 to 5 is pressed in the

programming panel, the cooking time is reduced by one

minute, if it is held down the time is automatically reduced to

one minute.

If the previous setting from 6 to 10 is pressed in the

programming panel , the cooking time is increased by one

minute, if it is held down the time is automatically increased to

99 minutes.

Changing or cancelling the time

Press the

0 symbol several times until the required x

indicator lights up. Change the cooking time in the

programming panel, or set to

‹‹.

Once the time has elapsed

The hotplate switches off. An audible signal sounds and

‹‹

appears in the time program function display for 10 seconds.

The

x indicator lights up. Pressing the 0 symbol turns off the

indicators and stops the signal.

Notes

■ If a cooking time has been programmed in several zones, it

can be set to display all time values. To do this, press the

symbol several times until the

x indicator for the required

hotplate lights up.

■ Cooking times of up to 99 minutes can be programmed.

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off a hotplate.

Programming

1. Press the 0 symbol several times until the W indicator lights

up.

‹‹ lights up in the time program function display.

2. Select the desired time in the programming panel.

The timer starts to count down after a few seconds.

Changing or cancelling the time

Press the

0 symbol several times until the W indicator lights

up. Change the cooking time in the programming panel, or set

‹‹.

Once the time has elapsed

A warning beep sounds. In the time program function

display

‹‹ is shown, and the W indicator comes on. After

10 seconds the indicators turn off.

Pressing the

0 symbol turns off the indicators and stops the

beep.





 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EH 375ME11E Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EH 375ME11E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info