Bedienungsanleitung Siemens EH375MV17E (Seite 11 von 20) (Englisch)

527462

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Powerboost function

The Powerboost function can be used to heat large amounts of

water more quickly than the power level

Š.

Restrictions when using

As two independent hotplates: (model 1) if you want to activate

this function for hotplate 1, hotplate 2 must be turned off, and

vice versa. If not turned off, the letter

› and power level Š will

flash alternately on the hotplate display and the power level

will be reset without activating the function.

As one single hotplate: (model 2) the Powerboost function can

be activated on the entire hotplate. In this case, place the pan

at the centre of the flexible zone as shown in the Flexible zone

section.

To activate

1. Select the power level Š.

2. Press the programming panel located above the @› symbol.

The function has been activated.

To turn off

Press the programming panel located above the @› symbol.

The Powerboost function has been deactivated.

Note: In certain circumstances, the Powerboost function may

turn off automatically in order to protect the electronic

components inside the hob.

Time programming function

This function may be used in two different ways:

■ to automatically switch off a hotplate.

■ as a timer.

Turning off a hotplate automatically

The zone turns off automatically once the selected time has

elapsed.

Programming the cooking time

The hob must be switched on:

1. Select the desired hotplate and power level.

2. Press the 0 symbol. The x indicator on the hotplate lights

up.

‹‹ is displayed on the time program function display. To

select another hotplate, press the

0 symbol several times

until the

x indicator for the desired hotplate lights up.

3. Within the next 10 seconds, select the desired cooking time

in the programming zone. The possible default setting is,

from left to right: 1, 2, 3, etc., up to 10 minutes.

After a few seconds, the cooking time begins to elapse.

Note: The same cooking time can be automatically

programmed for the all the hotplates. The programmed time

passes independently for each of the hotplates.

The Basic settings chapter provides information on

automatically programming the cooking time.

Automatic programming

If the previous setting from 1 to 5 is pressed in the

programming panel, the cooking time is reduced by one

minute, if it is held down the time is automatically reduced to

one minute.

If the previous setting from 6 to 10 is pressed in the

programming panel , the cooking time is increased by one

minute, if it is held down the time is automatically increased to

99 minutes.

Changing or cancelling the time

Press the

0 symbol several times until the required x

indicator lights up. Change the cooking time in the

programming panel, or set to

‹‹.

Once the time has elapsed

The hotplate switches off. An audible signal sounds and

‹‹

appears in the time program function display for 10 seconds.

The

x indicator lights up. Pressing the 0 symbol turns off the

indicators and stops the signal.

Notes

■ If a cooking time has been programmed in several zones, it

can be set to display all time values. To do this, press the

symbol several times until the

x indicator for the required

hotplate lights up.

■ Cooking times of up to 99 minutes can be programmed.

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off a hotplate.

Programming

1. Press the 0 symbol several times until the W indicator lights

up.

‹‹ lights up in the time program function display.

2. Select the desired time in the programming panel.

The timer starts to count down after a few seconds.







0RGHO

0RGHO

 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EH375MV17E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EH375MV17E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info