Bedienungsanleitung Siemens EH611TA16E (Seite 16 von 20) (Englisch)

530782

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Fixing malfunctions

Malfunctions are commonly due to small details. Before calling

the Technical Assistance Service, you should consider the

following advice and warnings.

Normal noise while the appliance is working

Induction heating technology is based on the creation of

electromagnetic fields that generate heat directly at the base of

the pan. Depending on how the pan has been manufactured,

certain noises or vibrations may be produced such as those

described below:

A deep humming sound as in a transformer

This noise is produced when cooking on a high power level. It

is caused by the amount of energy transferred from the hob to

the pan. The noise disappears or becomes faint when the

power level is lowered.

A low whistling sound

This noise is produced when the pan is empty. It disappears

when water or food is added to the pan.

A crackling sound

This noise occurs in pans which are made from different

materials superimposed on one another. It is caused by the

vibrations that occur in the ajoining surfaces of the different

superimposed materials. The noise comes from the pan. The

amount of food and cooking method can vary.

A high-pitched whistling sound

This noise is produced mainly in pans made from different

materials superimposed on one another, and it occurs when

such pans are heated at maximum power on two hotplates at

the same time. The whistling disappears or becomes fainter as

soon as the power level is lowered.

Noise from the fan

For proper use of the electronic system, the temperature of the

hob must be controlled. For this purpose, the hob has a fan

that starts working when detecting excess temperatures at

different power levels. The fan may also work due to inertia

after the hob has been switched off, if the temperature detected

is still too high.

Rhythmic sounds similar to a clock's hands

This noise is only produced when 3 or more hotplates are

working and disappears or is reduced when one of the

hotplates is switched off.

The noises described are normal, they are part of induction

heating technology and not a sign of malfunction.

Indicator Malfunction Solution

none The electric power supply has been inter-

rupted.

Use other electrical appliances to check whether there has been a

power cut.

The appliance has not been correctly con-

nected according to the connection dia-

gram.

Check that the appliance has been connected correctly according to

the connection diagram.

Electronic system malfunction. If the above checks do not resolve the malfunction, contact the Tech-

nical Assistance Service.

“ flashes

The control panel is damp or an object is

resting on it.

Dry the control panel area or remove the object.

“§ + number /

š + number /

¡ + number /

Electronic system malfunction. Turn the hob off from the mains. Wait 30 seconds or so and switch it

back on.*

”‹/”Š

There is an internal error in the operation. Turn the hob off from the mains. Wait 30 seconds or so and switch it

back on.*

”ƒ

The electronic system has overheated and

the corresponding hotplate has been

switched off.

Wait for the electronic system to cool down. Then push any symbol

on the hob.*

”…

The electronic system has overheated and

all the hotplates have been switched off.

” ‰

The hotplate has been working non-stop

too long at a high power level.

The automatic time stop has been activated. Press any symbol on the

control panel. The indicator goes out. The hob may now be switched

back on.

—‚

Incorrect supply voltage, outside normal

operating limits.

Please contact the local electricity board.

—ƒ/—„

The hotplate has overheated and has

switched off in order to protect its cooking

surface.

Wait until the electronic system has cooled down sufficiently before

switching the hotplate back on.

* If the indication persists, call the Technical Assistance Service.

Do not rest hot pans on the control panel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EH611TA16E Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EH611TA16E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info