Bedienungsanleitung Siemens EH645MB11M (Seite 11 von 16) (Englisch)

529658

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Time programming function

This function may be used in two different ways:

■ to automatically switch off a hotplate.

■ as a timer.

Turn off a hotplate automatically

Enter the cooking time for the desired hotplate. The hotplate

turns off automatically once the time has elapsed.

Programming

1.Select the desired power level.

2.Press the 0 symbol. Thex indicator of the hotplate lights

up. ‹‹ lights up in the time program function display. To

select another hotplate, press the

0 symbol several times

until the

xindicator for the desired hotplate lights up.

3.Select the required cooking time in the programming panel.

The possible previous setting is, from left to right 1,2, 3, etc.,

up to 10 minutes. Within the next 10 seconds, continue past

the options in the programming panel until reaching the

desired time.

After a few seconds the cooking time begins to count down.

Automatic programming

If the previous setting from 1 to 5 is pressed in the

programming panel, the cooking time is reduced by one

minute, if it is held down the time is automatically reduced to

one minute.

If the previous setting from 6 to10 is pressed in the

programming panel , the cooking time is increased by one

minute, if it is held down the time is automatically increased to

99 minutes.

Once the time has elapsed

The hotplate switches off. An audible signal sounds and

‹‹

appears in the time program function display for 10 seconds.

The

x indicator lights up. Pressing the 0 symbol turns off the

indicators and stops the signal.

Changing or cancelling the time

Press the 0 symbol several times until the required x

indicator lights up. Change the cooking time in the

programming panel, or set to

‹‹.

Notes

■ If a cooking time has been programmed in several zones, it

can be set to display all time values. To do this, press the

symbol several times until the

x indicator for the required

hotplate lights up.

■ Cooking times of up to 99 minutes can be programmed.

Automatic timer

With this function you may select a cooking time for all

hotplates. Once a hotplate is switched on, the selected time will

begin to count down. The hotplate will automatically switch off

when the cooking time has elapsed.

Instructions on activating the timer are found in the chapter

entitled "Basic settings".

Note: The cooking time of a zone may be cancelled or

changed:

Press the

0 symbol several times until the required x

indicator lights up. Change the cooking time in the

programming panel, or set to

‹‹.

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off a hotplate.

Programming

1.Press the 0 symbol several times until the W indicator lights

up.

‹‹ lights up in the time program function display.

2.Select the desired time in the programming panel.

The timer starts to count down after a few seconds.

Once the time has elapsed

A warning beep sounds. In the time program function display

‹‹ is shown, and the W indicator comes on. After 10 seconds

the indicators turn off.

Pressing the

0 symbol turns off the indicators and stops the

beep.

Changing or cancelling the time

Press the

0 symbol several times until the W indicator lights

up. Change the cooking time in the programming panel, or set

‹‹.

 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EH645MB11M Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EH645MB11M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info