Bedienungsanleitung Siemens EH685DB19E (Seite 11 von 20) (Englisch)

527397

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Time programming function

This function may be used in two different ways:

■ to automatically switch off a hotplate.

■ as a timer.

Turning off a hotplate automatically

The zone turns off automatically once the time has elapsed.

Programming the cooking time.

The hob must be switched on:

1. Select the desired power level.

2. Press the 0 symbol. The indicator x for the switched on

hotplates lights up.

‹‹ is displayed on the time program

function display.

3. Within 10 seconds, select the cooking time with the control

disc for the desired hotplate.

After a few seconds, the cooking time begins to elapse.

Note: The same cooking time can be automatically

programmed for the all the hotplates. The programmed time

passes independently for each of the hotplates.

The Basic settings chapter provides information on

automatically programming the cooking time.

Changing or cancelling the time

Press the

0 symbol several times until the required indicator

x lights up with greater intensity. Change the cooking time

with the control disc in the programming panel, or set to

‹‹.

Once the time has elapsed

The hotplate switches off. An audible signal sounds and

‹‹

appears in the time program function display for 10 seconds.

The

x indicator lights up. Pressing the 0 symbol turns off the

indicators and stops the signal.

Notes

■ If a cooking time has been programmed for several

hotplates, it can be set to display all the time values. To do

this, press the

0 symbol several times until the x indicator

for the required hotplate lights up with greater intensity.

■ Any cooking time can be programmed for up to 99 minutes.

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off a hotplate.

How to program

1. Press the 0 symbol several times until the W indicator lights

up.

‹‹ is displayed in the time program function display.

2. Select the required time using one of the control discs.

The timer starts to count down after a few seconds.

Once the time has elapsed

A warning beep sounds. In the time program function display

‹‹ is shown, and the W indicator comes on. After 10 seconds

the indicators turn off.

Pressing the

0 symbol turns off the indicators and stops the

beep.

Changing or cancelling the time

Press the

0 symbol several times until the W indicator lights

up. Change the time using one of the control discs or set to

‹‹.

Automatic time limitation

If the hotplate remains in use for a long time and no changes

are made in the settings, the automatic time limitation function

is triggered.

The hotplate stops heating. On the hotplate display,

”and ‰

flash alternately.

The indicator goes out when any symbol is pressed. The

hotplate can now be reset.

When the automatic time function is used, it is governed by the

selected power level (from 1 to 10 hours).

 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EH685DB19E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EH685DB19E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info