Bedienungsanleitung Siemens EH775FE27E (Seite 7 von 20) (Englisch)

527429

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show

those which are still hot. Avoid touching them when this

indicator is lit.

Although the hob is switched off, the indicator

œ or • will

remain on for as long as the hotplate is hot.

If the pan is removed before the hotplate is turned off, the

indicator

œ or • and the selected power level will appear

alternately.

Programming the hob

This section will show you how to program the hotplates. The

table contains power levels and cooking times for several

dishes.

Turning the hob on and off

The hob is turned on and off using the main switch.

To turn on: Press the

# symbol. A beep sounds. The indicator

located next to the main switch and the

‹ indicators of the

hotplates light up. The hob is ready for use.

To turn off: press the

# symbol until the indicators go out. All

hotplates are turned off. The residual heat indicator will remain

lit until the hotplates have cooled down sufficiently.

Notes

■ The hob switches off automatically when all the hotplates are

switched off for more than 20 seconds.

■ The settings are memorised for 4 seconds after the hob has

been turned off. If the hotplate is switched back on within this

time then the previous settings will be applied.

Setting the hotplate

The desired power level is set in the programming panel.

Power level 1 = minimum power.

Power level 9 = maximum power.

Each power level has an intermediate setting. This is marked

with a dot.

Selecting the hotplate and the power level

The hob must be switched on.

1. Select the hotplate with the ¹ symbol.

The

¬ symbol lights up in the display.

2. Within the next 10 seconds, slide a finger over the

programming zone until the desired power level lights up.

The power level has been set.

Changing the power level

Select the hotplate and set the desired power level in the

programming zone.

Switch off the hotplate

Select the hotplate and set it to

‹ in the programming panel.

The hotplate turns off and the residual heat indicator appears.

Notes

■ If no pan has been placed on the hotplate, the selected

power level flashes. After a certain time has elapsed, the

hotplate switches off.

■ If a pan has been placed on the hotplate before switching on

the hob, it will be detected within 20 seconds of pressing the

main switch and the hotplate will be selected automatically.

Once detected, select the power level within the next

20 seconds or the hotplate will switch off.

If more than one pan is placed on the hob, only one will be

detected when switching it on.

Cooking guidelines table

The table below contains some examples.

Cooking times depend on the power level, type, weight and

quality of the food. As such they are approximate.

When heating purées, creams and thick sauces, stir

occasionally.

Use power level 9 to begin cooking.

 

Power level Cooking time

Melting

Chocolate, chocolate coating 1-1. -

Butter, honey, gelatin 1-2 -

Heating and keeping warm

Stew (e.g., lentils) 1.-2 -

Milk** 1.-2. -

Sausages heated in water** 3-4 -

* Uncovered cooking

** Uncovered

*** Turn frequently

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EH775FE27E Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EH775FE27E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info