Bedienungsanleitung Siemens EH811BE15E (Seite 20 von 24) (Englisch)

791012

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

en Disposal

Fault Cause and troubleshooting

⁠ ⁠/ ⁠ ⁠ The cooking zone has overheated and has been switched off to protect the work surface.

▶Wait until the electronics have cooled down sufficiently before switching the cooking

zone back on.

⁠ ⁠ The cooking zone has been operating continuously for an extended period.

▶Individual safety switch-off is switched on. Touch any button to switch off the display so

that you can set the cooking zone again.

⁠ ⁠ ⁠ ⁠ ⁠/ ⁠ ⁠ ⁠ ⁠ ⁠ The operating voltage is incorrect and outside of the normal operating range.

▶Contact your energy supplier.

⁠ ⁠ ⁠ ⁠ The hob is not connected correctly.

▶Disconnect the hob from the mains. Connect the hob in accordance with the circuit dia-

gram.

⁠ ⁠ Demo mode is activated.

▶Disconnect the hob from the mains. Wait for 30 seconds and connect the hob. Touch

any sensor in the next threeminutes. Demo mode is deactivated.

19.3 Normal noises from your appliance

An induction hob may sometimes cause noises or vi-

brations, such as buzzing, crackling, hissing noises, fan

noises or rhythmic noises.

20 Disposal

20.1 Disposing of old appliance

Valuable raw materials can be reused by recycling.

1. Unplug the appliance from the mains.

2. Cut through the power cord.

3. Dispose of the appliance in an environmentally

friendly manner.

Information about current disposal methods are

available from your specialist dealer or local author-

ity.

This appliance is labelled in accord-

ance with European Directive

2012/19/EU concerning used elec-

trical and electronic appliances

(waste electrical and electronic equip-

ment - WEEE).

The guideline determines the frame-

work for the return and recycling of

used appliances as applicable

throughout the EU.

21 Customer Service

Function-relevant genuine spare parts according to the

corresponding Ecodesign Order can be obtained from

Customer Service for a period of at least 10 years from

the date on which your appliance was placed on the

market within the European Economic Area.

Note:Under the terms of the manufacturer's warranty

the use of Customer Service is free of charge.

Detailed information on the warranty period and terms

of warranty in your country is available from our after-

sales service, your retailer or on our website.

If you contact Customer Service, you will require the

product number (E-Nr.) and the production number

(FD) of your appliance.

The contact details for Customer Service can be found

in the enclosed Customer Service directory or on our

website.

21.1 Product number (E-Nr.) and production

number (FD)

You can find the product number (E-Nr.) and the pro-

duction number (FD) on the appliance's rating plate.

The rating plate can be found:

¡On the appliance certificate.

¡On the underside of the hob, towards the front.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EH811BE15E Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EH811BE15E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info