Bedienungsanleitung Siemens EH845FM17E (Seite 10 von 16) (Englisch)

527428

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Automatic programming

If the previous setting from 1 to 5 is pressed in the

programming zone, the cooking time is reduced by one minute.

If the previous setting from 6 to 10 is pressed in the

programming zone, the cooking time is increased by one

minute.

Changing or cancelling the time

Select the hotplate and then press the

0 symbol.

Change the cooking time using the programming zone or set

‹‹ in order to cancel the time.

Once the time has elapsed

The hotplate switches off. A warning signal sounds. The time

program function lights up

‹‹ for 10 seconds in the display.

When the

0 symbol is pressed, the indications turn off and the

beeping stops.

Notes

■ If cooking times have been programmed for various

hotplates, the time programming function always displays the

time for the selected hotplate.

■ Any cooking time can be programmed for up to 99 minutes.

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off a hotplate.

Programming

1.Press the 0 symbol several times until the W indicator lights

up.

‹‹ lights up in the time program function display.

2.Select the desired time in the programming panel.

The timer starts to count down after a few seconds.

Changing or cancelling the time

Press the

0 symbol several times until the W indicator lights

up. Change the time with the programming zone, or set to

‹‹.

Once the time has elapsed

A warning signal sounds. In the time program function

display

‹‹ is shown, and the W indicator lights up. After

10 seconds the indicators turn off.

When the

0 symbol is pressed, the indicators turn off and the

beeping stops.

Cleaning lock function

Cleaning the control panel while the hob is switched on may

change the settings.

In order to avoid this, the hob has a cleaning lock function.

Press the

‚/$symbol. A signal sounds. The control panel is

locked for 35 seconds. The control panel surface can now be

cleaned without the risk of changing the settings.

Note: The lock does not affect the main switch. The hob may

be turned off when desired.

Automatic time limitation

If the hotplate remains in use for a long time and no changes

are made in the settings, the automatic time limitation function

is triggered.

The hotplate stops heating. The ”, ‰ symbol and the residual

heat indicator

œ/• flash alternately in the display.

The indicator goes out when any symbol is pressed. The

hotplate can now be reset.

When the automatic time function is used, it is governed by the

selected power level (from 1 to 10 hours).

Displaying energy consumption

This function displays total energy consumption for the time the

hob has been switched on.

After switching off the hob, the consumption in kWh is

displayed for 10 seconds.

An example is shown in the image with a consumption

‚.‹‰ kWh.

The Basic Settings chapter provides information on activating

this function.



NZK

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EH845FM17E Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EH845FM17E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info