Bedienungsanleitung Siemens EH845FT17E (Seite 11 von 20) (Englisch)

530571

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Time programming function

This function may be used in two different ways:

■ to automatically switch off a hotplate.

■ as a timer.

A hotplate should switch off automatically

The hotplate switches off automatically after the time that is set

has elapsed.

Setting the cooking time

The hob must be switched on.

1. Select the hotplate and the required heat setting.

2. Touch the 0 symbol. x lights up in the display for the

hotplate.

‹‹ lights up in the timer display.

3. Within the next 10 seconds, set the required cooking time on

the settings range. The possible presets from left to right are

1, 2, 3, etc., to 10 minutes.

After a few seconds, the cooking time begins to elapse.

Notes

■ The same cooking time can be set automatically for all

hotplates. The set time for each of the hotplates counts down

independently.

The Basic settings section contains information on

automatically programming the cooking time.

■ If the combi zone or move function is selected when the

hotplates are combined, the set time is the same for both

hotplates.

Automatic programming

If the previous setting from 1 to 5 is pressed in the

programming zone, the cooking time is reduced by one minute.

If the previous setting from 6 to 10 is pressed in the

programming zone, the cooking time is increased by one

minute.

Changing or cancelling the time

Select the hotplate and then press the

0 symbol.

Change the cooking time using the programming zone or set

‹‹ in order to cancel the time.

Once the time has elapsed

The hotplate switches off. A warning signal sounds. The time

program function lights up

‹‹ for 10 seconds in the display.

When the

0 symbol is pressed, the indications turn off and the

beeping stops.

Notes

■ If cooking times have been programmed for various

hotplates, the time programming function always displays the

time for the selected hotplate.

■ Any cooking time can be programmed for up to 99 minutes.

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off a hotplate.

Programming

1. Press the 0 symbol several times until the W indicator lights

up.

‹‹ lights up in the time program function display.

2. Select the desired time in the programming panel.

The timer starts to count down after a few seconds.

Changing or cancelling the time

Press the

0 symbol several times until the W indicator lights

up. Change the time with the programming zone, or set to

‹‹.

Once the time has elapsed

A warning signal sounds. In the time program function

display

‹‹ is shown, and the W indicator lights up. After

10 seconds the indicators turn off.

When the

0 symbol is pressed, the indicators turn off and the

beeping stops.

Cleaning lock function

Cleaning the control panel while the hob is on may change the

settings.

In order to avoid this, the hob has a cleaning lock function.

Press the

# symbol. A signal sounds. The control panel is

locked for 35 seconds. The surface of the control panel can

now be cleaned without risk of changing the settings.

Note: The lock does not affect the main switch. The hob may

be switched off when desired.

 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EH845FT17E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EH845FT17E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info