Bedienungsanleitung Siemens EH875MM21E (Seite 11 von 20) (Englisch)

530770

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Childproof lock

The hob can be protected against being accidentally turned on,

to ensure that children do not switch on the hotplates.

Activating and deactivating the childproof

lock.

The range must be turned off.

To activate: press and hold the

# symbol for approx.

4 seconds. The

@ symbol lights up for 10 seconds. The

range is locked.

To deactivate: press and hold the

# symbol for approx.

4 seconds. The lock is now deactivated.

Childproof lock

With this function, the childproof lock automatically activates

when a hob is switched off.

Activating and deactivating

All of the relevant information on the automatic childproof lock

connection can be found in the Basic settings chapter.

Powerboost function

The Powerboost function can be used to heat large amounts of

water more quickly than the power level

Š.

Restrictions when using

This function is available on all hotplates, provided that no other

hotplate in the same group is operating, (see diagram).

Otherwise, the

› and Š symbols will flash on the display of the

selected hotplate; then the power level

Š is automatically set.

To activate

1. Select the power level Š.

2. Press the programming panel located above the @› symbol.

The function has been activated.

To turn off

Press the programming panel located above the @› symbol.

The Powerboost function has been deactivated.

Note: In certain circumstances, the Powerboost function may

turn off automatically in order to protect the electronic

components inside the hob.

Time programming function

This function may be used in two different ways:

■ to automatically switch off a hotplate.

■ as a timer.

A hotplate should switch off automatically

The hotplate switches off automatically after the time that is set

has elapsed.

Setting the cooking time

The hob must be switched on.

1. Select the hotplate and set the heat setting.

2. Touch the 0 symbol. The x indicator for the required

hotplate lights up.

‹‹ appears in the timer display.

3. Within the next 10 seconds, set the required cooking time in

the control panel. The possible presets from left to right are 1,

2, 3..... up to 10 minutes.

After a few seconds, the cooking time begins to elapse.

Note: The same cooking time can be automatically

programmed for the all the hotplates. The programmed time

passes independently for each of the hotplates.

The Basic settings chapter provides information on

automatically programming the cooking time.

Automatic programming

If the previous setting from 1 to 5 is pressed in the

programming zone, the cooking time is reduced by one minute.

If the previous setting from 6 to 10 is pressed in the

programming zone, the cooking time is increased by one

minute.











*URXS

*URXS

 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EH875MM21E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EH875MM21E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info