Bedienungsanleitung Siemens EH885DC12E (Seite 7 von 16) (Englisch)

530766

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show

those which are still hot. Avoid touching them when this

indicator is lit.

Although the hob is switched off, the indicator

œ or • will

remain on for as long as the hotplate is hot.

If the pan is removed before the hotplate is turned off, the

indicator

œ or • and the selected power level will appear

alternately.

Control discs

The power levels and time functions can be set by rotating the

control discs.

The control discs are removable. Thus, they can be easily

cleaned.

The control discs can also be removed from the hob while it is

working. All the hotplates switch off after 3 seconds. The

display shows the residual heat indicator

œ/•.

If the control disc is put back in place, the hob may be

controlled once more.

Always place the control disc in its compartment with the shiny

black side downwards.

Storing the setting discs

The setting discs are magnetic. Keep the setting discs away

from magnetic data carriers, such as video cassettes, diskettes,

credit cards and cards with magnetic strips. These may

become damaged. They can also cause interference in

television sets and monitors.

Note: The setting discs are magnetic. Small metal parts which

attach themselves to the underside can scratch the surface of

the glass ceramic and front moulding. Always wipe and clean

the setting discs thoroughly.

Programming the hob

This section will show you how to program the hotplates. The

table contains power levels and cooking times for several

dishes.

Switching the hob on and off

The hob is turned on and off using the main switch.

To turn on: press the

# symbol. The indicator ‹ for the

hotplates is turned on. The hob is ready for use.

To switch off: press the symbol

# until the hotplates indicator

‹ is turned off. All hotplates are turned off. The residual heat

indicator stays lit until the hotplates have cooled sufficiently.

Note: The hob switches off automatically when all the hotplates

are switched off for more than 10 seconds.

Setting the hotplate

Choose the power level using the control discs.

Power level 1 = minimum power.

Power level 9 = maximum power.

Each power level has an intermediate setting. This is marked

with a dot.

Select the hotplate and the power level

The hob must be switched on.

Turn the control disc of the desired hotplate until the desired

power level is shown on its display.

The hotplate is switched on.

To change the power level:

Select a new power level using the control disc.

To turn off the hotplate:

Turn the control disc until

‹ is displayed. The hotplate turns off

and the residual heat indicator appears.

Note: If no pan has been placed on the induction hotplate, the

selected power level flashes. After a certain time, the hotplate

switches off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EH885DC12E Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EH885DC12E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info