Bedienungsanleitung Siemens EH901SV17E (Seite 11 von 16) (Englisch)

527384

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Automatic programming

If the previous setting from 1 to 5 is pressed in the

programming panel, the cooking time is reduced by one

minute, if it is held down the time is automatically reduced to

one minute.

If the previous setting from 6 to 10 is pressed in the

programming panel , the cooking time is increased by one

minute, if it is held down the time is automatically increased to

99 minutes.

Changing or cancelling the time

Press the

0 symbol of the desired hotplate. Change the

cooking time in the programming panel, or set to

‹‹.

Once the time has elapsed

The hotplate switches off. The beep sounds and the display

comes on

‹‹ for 10 seconds. The x indicator lights up.

Pressing the

0 symbol turns off the indicators and stops the

beeping.

Note: Any cooking time can be programmed up to 99 minutes.

Timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. The hob must be switched

on. The timer can be set for any hotplate not turned on. This

function does not automatically switch off a hotplate.

How to program

1. Press the symbol 0 for the hotplate, the indicator W is

turned on.

‹‹ lights up in the time program function display.

2. Select the desired time in the programming panel.

The timer starts to count down after a few seconds.

Changing or cancelling the time

Press the

0 symbol of the desired hotplate. Change the

cooking time in the programming panel, or set to

‹‹.

Once the time has elapsed

A warning beep sounds. In the time program function display

‹‹ is shown, and the W indicator comes on. After 10 seconds

the indicators turn off.

Pressing the

0 symbol turns off the indicators and stops the

beep.

Note: When the timer is activated, the corresponding hotplate

is locked. First turn off the timer and then the hotplate.

Automatic time limitation

If the hotplate remains in use for a long time and no changes

are made in the settings, the automatic time limitation function

is triggered.

The hotplate stops heating. The

”‰ symbol and the residual

heat indicator

œ/• flash alternatively in the display.

The indicator goes out when any symbol is pressed. The

hotplate can now be reset.

When the automatic time function is used, it is governed by the

selected power level (from 1 to 10 hours).

Cleaning lock function

Cleaning the control panel while the hob is on may change the

settings.

In order to avoid this, the hob has a cleaning lock function.

Press the

# symbol. A signal sounds. The control panel is

locked for 35 seconds. The surface of the control panel can

now be cleaned without risk of changing the settings.

Note: The lock does not affect the main switch. The hob may

be switched off when desired.

Basic settings

The device has several basic settings. These settings may be

adapted to the user's individual needs.

Indicator Function

™‚

Childproof lock

‹ Deactivated.*

‚ Activated.

™ƒ

Audible signals

‹ Confirmation and error signals deactivated.

‚ Only confirmation signal deactivated.

ƒ All signals activated.*

™†

Automatic programming of cooking time

‹ Switched off.*

‚-ŠŠ Automatic shut-off time

*Factory settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EH901SV17E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EH901SV17E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info