Bedienungsanleitung Siemens EH975FE17E (Seite 11 von 16) (Englisch)

530248

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Automatic programming

If the previous setting from 1 to 5 is pressed in the

programming panel, the cooking time is reduced by one

minute, if it is held down the time is automatically reduced to

one minute.

If the previous setting from 6 to 10 is pressed in the

programming panel , the cooking time is increased by one

minute, if it is held down the time is automatically increased to

99 minutes.

Changing or cancelling the time

Press the

0 symbol several times until the required x

indicator lights up. Change the cooking time in the

programming panel, or set to

‹‹.

Once the time has elapsed

The hotplate switches off. An audible signal sounds and

‹‹

appears in the time program function display for 10 seconds.

The

x indicator lights up. Pressing the 0 symbol turns off the

indicators and stops the signal.

Notes

■ If a cooking time has been programmed in several zones, it

can be set to display all time values. To do this, press the

symbol several times until the

x indicator for the required

hotplate lights up.

■ Cooking times of up to 99 minutes can be programmed.

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off a hotplate.

Programming

1. Press the 0 symbol several times until the W indicator lights

up.

‹‹ lights up in the time program function display.

2. Select the desired time in the programming panel.

The timer starts to count down after a few seconds.

Changing or cancelling the time

Press the

0 symbol several times until the W indicator lights

up. Change the cooking time in the programming panel, or set

‹‹.

Once the time has elapsed

A warning beep sounds. In the time program function display

‹‹ is shown, and the W indicator comes on. After 10 seconds

the indicators turn off.

Pressing the

0 symbol turns off the indicators and stops the

beep.

Cleaning lock function

Cleaning the control panel while the hob is on may change the

settings.

In order to avoid this, the hob has a cleaning lock function.

Press the

# symbol. A signal sounds. The control panel is

locked for 35 seconds. The surface of the control panel can

now be cleaned without risk of changing the settings.

Note: The lock does not affect the main switch. The hob may

be switched off when desired.

Automatic time limitation

If the hotplate remains in use for a long time and no changes

are made in the settings, the automatic time limitation function

is triggered.

The hotplate stops heating. On the hotplate display,

”and ‰

flash alternately.

The indicator goes out when any symbol is pressed. The

hotplate can now be reset.

When the automatic time function is used, it is governed by the

selected power level (from 1 to 10 hours).

Basic settings

The device has several basic settings. These settings may be

adapted to the user's individual needs.

Indicator Function

™‚

Childproof lock

‹ Deactivated.*

‚ Activated.

™ƒ

Audible signals

‹ Confirmation and error signals deactivated.

‚ Only confirmation signal deactivated.

ƒ All signals activated.*

™†

Automatic programming of cooking time

‹ Switched off.*

‚-ŠŠ Automatic shut-off time.

*Factory settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EH975FE17E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EH975FE17E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info