Bedienungsanleitung Siemens EH975SZ11E (Seite 10 von 16) (Englisch)

530665

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Powerboost function

The Powerboost function can be used to heat large amounts of

water more quickly than the power level

Š.

Use limitations

This function may be used for all hotplates, provided that the

other hotplate in the same group is not turned on. (See figure)

Otherwise, the display for the selected hotplate will flash

› and

Š; then it will automatically set the power level Š.

In Group 2, the Powerboost function may be activated at the

same time for all hotplates. (see diagram)

To activate

1.Select the power level Š.

2.Press the programming panel located above the @› symbol.

The function has been activated.

To turn off

Press the programming panel located above the @› symbol.

The Powerboost function has been deactivated.

Note: In certain circumstances, the Powerboost function may

turn off automatically in order to protect the electronic

components inside the hob.

Time programming function

This function may be used in two different ways:

■ to automatically switch off a hotplate.

■ as a timer.

Turning off a hotplate automatically

Enter the cooking time for the required hotplate. The hotplate

turns off automatically once the time has elapsed.

How to program

1.Select the required power level.

2.Press the 0 symbol of the desired hotplate. The hotplate

display shows

‹‹ and the indicator x comes on.

3.Select the required cooking time in the programming panel.

The possible previous setting is, from left to right 1, 2, 3, etc.,

up to 10 minutes. Within the next 10 seconds, continue

passing through the options in the programming panel until

reaching the desired time.

The cooking time will be displayed for 10 seconds then begin

to count down.

Automatic programming

If the previous setting from 1 to 5 is pressed in the

programming panel, the cooking time is reduced by one

minute, if it is held down the time is automatically reduced to

one minute.

If the previous setting from 6 to 10 is pressed in the

programming panel , the cooking time is increased by one

minute, if it is held down the time is automatically increased to

99 minutes.

Once the time has elapsed

The hotplate switches off. The beep sounds and the display

comes on

‹‹ for 10 seconds. The x indicator lights up.

Pressing the

0 symbol turns off the indicators and stops the

beeping.

Changing or cancelling the time

Press the

0 symbol of the desired hotplate. Change the

cooking time in the programming panel, or set to

‹‹.

Note: Any cooking time can be programmed up to 99 minutes.

Automatic timer

With this function you may select a cooking time for all

hotplates. Once a hotplate is switched on, the selected time will

begin to count down. The hotplate will automatically switch off

when the cooking time has elapsed.

Instructions on activating the timer are found in the chapter

entitled "Basic settings".

Note: The cooking time of a hotplate may be cancelled or

changed:

Press the

0 symbol of the desired hotplate. Change the

cooking time in the programming panel, or set to

‹‹.

Timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. The hob must be switched

on. The timer can be set for any hotplate not turned on. This

function does not automatically switch off a hotplate.

How to program

1.Press the symbol 0 for the hotplate, the indicator W is

turned on.

‹‹ lights up in the time program function display.

2.Select the desired time in the programming panel.

The timer starts to count down after a few seconds.















*URXS

*URXS

*URXS

 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EH975SZ11E Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EH975SZ11E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info