Bedienungsanleitung Siemens EI645EB11M (Seite 10 von 12) (Englisch)

529655

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Care of the appliance

Apply an additive to protect and preserve the hob. Follow the

advice and warnings provided with the product.

Hob frame

In order to avoid damage to the hob frame, follow the

indications below:

■ Use only slightly soapy hot water

■ Do not use sharp or abrasive products

■ Do not use a glass scraper

Fixing malfunctions

Malfunctions are usually due to small details. Before calling the

Technical Assistance Service, you should consider the

following advice and warnings.

Normal noise while the appliance is working

Induction heating technology is based on the creation of

electromagnetic fields that generate heat directly at the base of

the pan. Depending on how the pan has been manufactured,

these may produce certain noises or vibrations such as those

described below:

A deep humming sound as in a transformer

This noise is produced when cooking on a high power level. It

is caused by the amount of energy transferred from the hob to

the pan. The noise disappears or becomes faint when the

power level is lowered.

A low whistling sound

This noise is produced when the pan is empty. It disappears

when water or food is added to the pan.

A crackling sound

This noise occurs in pans which are made from different

materials superimposed on one another. It is caused by the

vibrations that occur ajoining surfaces of the different

superimposed materials. The noise comes from the pan. The

amount of food and cooking method can vary.

A high-pitched whistling sound

This noise is produced mainly in pans made from different

materials superimposed on one another, and it occurs when

such pans are heated at maximum power on two hotplates at

the same time. The whistling disappears or becomes fainter as

soon as the power level is lowered.

Noise from the fan

For proper use of the electronic system, the temperature of the

hob must be controlled. For this purpose, the hob has a fan

that starts working after detecting excess temperatures at

different power levels. The fan may also work due to inertia

after the hob has been switched off, if the temperature detected

is still too high.

The noises described are normal, they are part of induction

heating technology and not a sign of malfunction.

Indicator Malfunction Solution

none The electric power supply has been cut off. Use other electrical appliances to check whether there has been a

power cut.

The appliance has not been correctly con-

nected following the connection diagram.

Check that the appliance has been connected correctly according to

the connection diagram.

Electronic system malfunction. If in the above checks, the malfunction is not resolved, contact the

Technical Assistance Service.

“ flashes

The control panel is damp or an object is

resting on it.

Dry the control panel area or remove the object.

“§ + number /

š + number /

¡ + number

Electronic system malfunction. Unplug the hob from the mains. Wait about 30 seconds before plug-

ging it in again.*

”‹ / ”Š

There is an internal error in the operation. Unplug the hob from the mains. Wait about 30 seconds before plug-

ging it in again.*

”ƒ

The electronic system has overheated and

the corresponding hotplate has been

switched off.

Turn the control to the 0 setting. Wait until the electronic system has

cooled down sufficiently before switching the hotplate back on.*

”…

The electronic system has overheated and

all hotplates have been switched off.

Turn the controls to the 0 setting. Wait until the electronic system has

cooled down sufficiently before switching it back on.*

—‚

Supply voltage outside normal operating

limits.

Please contact your local electricity company.

—ƒ /—„

The hotplate has overheated and has

switched off in order to protect its cooking

surface.

Wait until the electronic system has cooled down sufficiently before

switching it back on.

* If the warning persists call the Technical Assistance Service.

Do not rest hot pans on the control panel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EI645EB11M Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EI645EB11M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info